X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fspi_flash.h;h=d9b2af856c08feb18adda8934452483800f83bb4;hb=915f15ac5746739da0aa2ee2840c2d00dc65aaaa;hp=f3c4e834247a0de3e1ca791643f3e38a16b35d00;hpb=9c486e7cb03787016d2d5a360c5a62296bf5ca7b;p=oweals%2Fu-boot.git diff --git a/include/spi_flash.h b/include/spi_flash.h index f3c4e83424..d9b2af856c 100644 --- a/include/spi_flash.h +++ b/include/spi_flash.h @@ -1,10 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Common SPI flash Interface * * Copyright (C) 2008 Atmel Corporation * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc. - * - * SPDX-License-Identifier: GPL-2.0 */ #ifndef _SPI_FLASH_H_ @@ -12,102 +11,24 @@ #include /* Because we dereference struct udevice here */ #include +#include -#ifndef CONFIG_SF_DEFAULT_SPEED -# define CONFIG_SF_DEFAULT_SPEED 1000000 +/* by default ENV use the same parameters than SF command */ +#ifndef CONFIG_ENV_SPI_BUS +# define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS #endif -#ifndef CONFIG_SF_DEFAULT_MODE -# define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 +#ifndef CONFIG_ENV_SPI_CS +# define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS #endif -#ifndef CONFIG_SF_DEFAULT_CS -# define CONFIG_SF_DEFAULT_CS 0 +#ifndef CONFIG_ENV_SPI_MAX_HZ +# define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED #endif -#ifndef CONFIG_SF_DEFAULT_BUS -# define CONFIG_SF_DEFAULT_BUS 0 +#ifndef CONFIG_ENV_SPI_MODE +# define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE #endif struct spi_slave; -/** - * struct spi_flash - SPI flash structure - * - * @spi: SPI slave - * @dev: SPI flash device - * @name: Name of SPI flash - * @dual_flash: Indicates dual flash memories - dual stacked, parallel - * @shift: Flash shift useful in dual parallel - * @flags: Indication of spi flash flags - * @size: Total flash size - * @page_size: Write (page) size - * @sector_size: Sector size - * @erase_size: Erase size - * @bank_read_cmd: Bank read cmd - * @bank_write_cmd: Bank write cmd - * @bank_curr: Current flash bank - * @erase_cmd: Erase cmd 4K, 32K, 64K - * @read_cmd: Read cmd - Array Fast, Extn read and quad read. - * @write_cmd: Write cmd - page and quad program. - * @dummy_byte: Dummy cycles for read operation. - * @memory_map: Address of read-only SPI flash access - * @flash_lock: lock a region of the SPI Flash - * @flash_unlock: unlock a region of the SPI Flash - * @flash_is_locked: check if a region of the SPI Flash is completely locked - * @read: Flash read ops: Read len bytes at offset into buf - * Supported cmds: Fast Array Read - * @write: Flash write ops: Write len bytes from buf into offset - * Supported cmds: Page Program - * @erase: Flash erase ops: Erase len bytes from offset - * Supported cmds: Sector erase 4K, 32K, 64K - * return 0 - Success, 1 - Failure - */ -struct spi_flash { - struct spi_slave *spi; -#ifdef CONFIG_DM_SPI_FLASH - struct udevice *dev; -#endif - const char *name; - u8 dual_flash; - u8 shift; - u16 flags; - - u32 size; - u32 page_size; - u32 sector_size; - u32 erase_size; -#ifdef CONFIG_SPI_FLASH_BAR - u8 bank_read_cmd; - u8 bank_write_cmd; - u8 bank_curr; -#endif - u8 erase_cmd; - u8 read_cmd; - u8 write_cmd; - u8 dummy_byte; - - void *memory_map; - - int (*flash_lock)(struct spi_flash *flash, u32 ofs, size_t len); - int (*flash_unlock)(struct spi_flash *flash, u32 ofs, size_t len); - int (*flash_is_locked)(struct spi_flash *flash, u32 ofs, size_t len); -#ifndef CONFIG_DM_SPI_FLASH - /* - * These are not strictly needed for driver model, but keep them here - * while the transition is in progress. - * - * Normally each driver would provide its own operations, but for - * SPI flash most chips use the same algorithms. One approach is - * to create a 'common' SPI flash device which knows how to talk - * to most devices, and then allow other drivers to be used instead - * if required, perhaps with a way of scanning through the list to - * find the driver that matches the device. - */ - int (*read)(struct spi_flash *flash, u32 offset, size_t len, void *buf); - int (*write)(struct spi_flash *flash, u32 offset, size_t len, - const void *buf); - int (*erase)(struct spi_flash *flash, u32 offset, size_t len); -#endif -}; - struct dm_spi_flash_ops { int (*read)(struct udevice *dev, u32 offset, size_t len, void *buf); int (*write)(struct udevice *dev, u32 offset, size_t len, @@ -154,6 +75,18 @@ int spi_flash_write_dm(struct udevice *dev, u32 offset, size_t len, */ int spi_flash_erase_dm(struct udevice *dev, u32 offset, size_t len); +/** + * spi_flash_std_probe() - Probe a SPI flash device + * + * This is the standard internal method for probing a SPI flash device to + * determine its type. It can be used in chip-specific drivers which need to + * do this, typically with of-platdata + * + * @dev: SPI-flash device to probe + * @return 0 if OK, -ve on error + */ +int spi_flash_std_probe(struct udevice *dev); + int spi_flash_probe_bus_cs(unsigned int busnum, unsigned int cs, unsigned int max_hz, unsigned int spi_mode, struct udevice **devp); @@ -186,7 +119,7 @@ static inline int spi_flash_erase(struct spi_flash *flash, u32 offset, struct sandbox_state; int sandbox_sf_bind_emul(struct sandbox_state *state, int busnum, int cs, - struct udevice *bus, int of_offset, const char *spec); + struct udevice *bus, ofnode node, const char *spec); void sandbox_sf_unbind_emul(struct sandbox_state *state, int busnum, int cs); @@ -199,19 +132,37 @@ void spi_flash_free(struct spi_flash *flash); static inline int spi_flash_read(struct spi_flash *flash, u32 offset, size_t len, void *buf) { - return flash->read(flash, offset, len, buf); + struct mtd_info *mtd = &flash->mtd; + size_t retlen; + + return mtd->_read(mtd, offset, len, &retlen, buf); } static inline int spi_flash_write(struct spi_flash *flash, u32 offset, size_t len, const void *buf) { - return flash->write(flash, offset, len, buf); + struct mtd_info *mtd = &flash->mtd; + size_t retlen; + + return mtd->_write(mtd, offset, len, &retlen, buf); } static inline int spi_flash_erase(struct spi_flash *flash, u32 offset, size_t len) { - return flash->erase(flash, offset, len); + struct mtd_info *mtd = &flash->mtd; + struct erase_info instr; + + if (offset % mtd->erasesize || len % mtd->erasesize) { + printf("SF: Erase offset/length not multiple of erase size\n"); + return -EINVAL; + } + + memset(&instr, 0, sizeof(instr)); + instr.addr = offset; + instr.len = len; + + return mtd->_erase(mtd, &instr); } #endif