X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fnetdev.h;h=7a211bc609ddc0eb5194b543eeb54f8999255e75;hb=f1a88cf6af6c474bcf53f8f2f32aea3af5419e7a;hp=28eab4640760b1fff1d6664c96a5a5bcc10c420f;hpb=de99a17c9a8df4c0b4c4f57b5bb266835cbb9fab;p=oweals%2Fu-boot.git

diff --git a/include/netdev.h b/include/netdev.h
index 28eab46407..7a211bc609 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -80,16 +80,8 @@ int tsi108_eth_initialize(bd_t *bis);
 int uec_standard_init(bd_t *bis);
 int uli526x_initialize(bd_t *bis);
 int armada100_fec_register(unsigned long base_addr);
-int xilinx_axiemac_initialize(bd_t *bis, unsigned long base_addr,
-							unsigned long dma_addr);
-int xilinx_emaclite_of_init(const void *blob);
-int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr,
-							int txpp, int rxpp);
 int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags,
 						unsigned long ctrl_addr);
-int zynq_gem_of_init(const void *blob);
-int zynq_gem_initialize(bd_t *bis, phys_addr_t base_addr,
-			int phy_addr, u32 emio);
 /*
  * As long as the Xilinx xps_ll_temac ethernet driver has not its own interface
  * exported by a public hader file, we need a global definition at this point.
@@ -142,64 +134,6 @@ static inline int pci_eth_init(bd_t *bis)
 	return num;
 }
 
-/*
- * Boards with mv88e61xx switch can use this by defining
- * CONFIG_MV88E61XX_SWITCH in respective board configheader file
- * the stuct and enums here are used to specify switch configuration params
- */
-#if defined(CONFIG_MV88E61XX_SWITCH)
-
-/* constants for any 88E61xx switch */
-#define MV88E61XX_MAX_PORTS_NUM	6
-
-enum mv88e61xx_cfg_mdip {
-	MV88E61XX_MDIP_NOCHANGE,
-	MV88E61XX_MDIP_REVERSE
-};
-
-enum mv88e61xx_cfg_ledinit {
-	MV88E61XX_LED_INIT_DIS,
-	MV88E61XX_LED_INIT_EN
-};
-
-enum mv88e61xx_cfg_rgmiid {
-	MV88E61XX_RGMII_DELAY_DIS,
-	MV88E61XX_RGMII_DELAY_EN
-};
-
-enum mv88e61xx_cfg_prtstt {
-	MV88E61XX_PORTSTT_DISABLED,
-	MV88E61XX_PORTSTT_BLOCKING,
-	MV88E61XX_PORTSTT_LEARNING,
-	MV88E61XX_PORTSTT_FORWARDING
-};
-
-struct mv88e61xx_config {
-	char *name;
-	u8 vlancfg[MV88E61XX_MAX_PORTS_NUM];
-	enum mv88e61xx_cfg_rgmiid rgmii_delay;
-	enum mv88e61xx_cfg_prtstt portstate;
-	enum mv88e61xx_cfg_ledinit led_init;
-	enum mv88e61xx_cfg_mdip mdip;
-	u32 ports_enabled;
-	u8 cpuport;
-};
-
-/*
- * Common mappings for Internal VLANs
- * These mappings consider that all ports are useable; the driver
- * will mask inexistent/unused ports.
- */
-
-/* Switch mode : routes any port to any port */
-#define MV88E61XX_VLANCFG_SWITCH { 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F }
-
-/* Router mode: routes only CPU port 5 to/from non-CPU ports 0-4 */
-#define MV88E61XX_VLANCFG_ROUTER { 0x20, 0x20, 0x20, 0x20, 0x20, 0x1F }
-
-int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig);
-#endif /* CONFIG_MV88E61XX_SWITCH */
-
 struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id);
 #ifdef CONFIG_PHYLIB
 struct phy_device;