X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fmpc824x.h;h=cb8445830e3d299e724b538aad3518f6e224a3b7;hb=52a8b82074d1c3a3dcde8e3d90e6a04f7eb3a1f8;hp=5aa9370b1963f4100e8ff7cd90ef2dbed50441c6;hpb=f61f1e150c84f5b9347fca79a4bc5f2286c545d2;p=oweals%2Fu-boot.git

diff --git a/include/mpc824x.h b/include/mpc824x.h
index 5aa9370b19..cb8445830e 100644
--- a/include/mpc824x.h
+++ b/include/mpc824x.h
@@ -258,7 +258,7 @@
 #define PLTR		0x8000000d  /* PCI Latancy Timer Register */
 #define PHTR		0x8000000e  /* PCI Header Type Register */
 #define BISTCTRL	0x8000000f  /* BIST Control */
-#define LMBAR		0x80000010  /* Local Base Addres Register */
+#define LMBAR		0x80000010  /* Local Base Address Register */
 #define PCSRBAR		0x80000014  /* PCSR Base Address Register */
 #define ILR		0x8000003c  /* PCI Interrupt Line Register */
 #define IPR		0x8000003d  /* Interrupt Pin Register */
@@ -451,45 +451,6 @@
 #define MICR_EADDR_MASK		0x30000000
 #define MICR_EADDR_SHIFT	28
 
-#define BATU_BEPI_MSK		0xfffe0000
-#define BATU_BL_MSK		0x00001ffc
-
-#define BATU_BL_128K		0x00000000
-#define BATU_BL_256K		0x00000004
-#define BATU_BL_512K		0x0000000c
-#define BATU_BL_1M		0x0000001c
-#define BATU_BL_2M		0x0000003c
-#define BATU_BL_4M		0x0000007c
-#define BATU_BL_8M		0x000000fc
-#define BATU_BL_16M		0x000001fc
-#define BATU_BL_32M		0x000003fc
-#define BATU_BL_64M		0x000007fc
-#define BATU_BL_128M		0x00000ffc
-#define BATU_BL_256M		0x00001ffc
-
-#define BATU_VS			0x00000002
-#define BATU_VP			0x00000001
-
-#define BATL_BRPN_MSK		0xfffe0000
-#define BATL_WIMG_MSK		0x00000078
-
-#define BATL_WRITETHROUGH	0x00000040
-#define BATL_CACHEINHIBIT	0x00000020
-#define BATL_MEMCOHERENCE	0x00000010
-#define BATL_GUARDEDSTORAGE	0x00000008
-
-#define BATL_PP_MSK		0x00000003
-#define BATL_PP_00		0x00000000 /* No access */
-#define BATL_PP_01		0x00000001 /* Read-only */
-#define BATL_PP_10		0x00000002 /* Read-write */
-#define BATL_PP_11		0x00000003
-
-/*
- * I'd attempt to do defines for the PP bits, but it's use is a bit
- * too complex, see the PowerPC Operating Environment Architecture
- * section in the PowerPc arch book, chapter 4.
- */
-
 /*eumb and epic config*/
 
 #define EPIC_FPR		0x00041000