X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Flinux%2Fmtd%2Fnand.h;h=67d2651481be3357cf0937526fada71f5f8c66d4;hb=7f14fb20f895016fb38d30ce71aeb4d441b5bcb8;hp=489c703b9b2cf3c3703877cfa1347e9eede453ee;hpb=ff94bc40af3481d47546595ba73c136de6af6929;p=oweals%2Fu-boot.git

diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 489c703b9b..67d2651481 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -59,15 +59,15 @@ extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
 
 /* The maximum number of NAND chips in an array */
 #define NAND_MAX_CHIPS		8
-#endif
-
+#else
 /*
  * This constant declares the max. oobsize / page, which
  * is supported now. If you add a chip with bigger oobsize/page
  * adjust this accordingly.
  */
-#define NAND_MAX_OOBSIZE	744
-#define NAND_MAX_PAGESIZE	8192
+#define NAND_MAX_OOBSIZE       744
+#define NAND_MAX_PAGESIZE      8192
+#endif
 
 /*
  * Constants for hardware specific CLE/ALE/NCE function
@@ -385,6 +385,84 @@ struct nand_onfi_vendor_micron {
 	u8 param_revision;
 } __packed;
 
+struct jedec_ecc_info {
+	u8 ecc_bits;
+	u8 codeword_size;
+	__le16 bb_per_lun;
+	__le16 block_endurance;
+	u8 reserved[2];
+} __packed;
+
+/* JEDEC features */
+#define JEDEC_FEATURE_16_BIT_BUS	(1 << 0)
+
+struct nand_jedec_params {
+	/* rev info and features block */
+	/* 'J' 'E' 'S' 'D'  */
+	u8 sig[4];
+	__le16 revision;
+	__le16 features;
+	u8 opt_cmd[3];
+	__le16 sec_cmd;
+	u8 num_of_param_pages;
+	u8 reserved0[18];
+
+	/* manufacturer information block */
+	char manufacturer[12];
+	char model[20];
+	u8 jedec_id[6];
+	u8 reserved1[10];
+
+	/* memory organization block */
+	__le32 byte_per_page;
+	__le16 spare_bytes_per_page;
+	u8 reserved2[6];
+	__le32 pages_per_block;
+	__le32 blocks_per_lun;
+	u8 lun_count;
+	u8 addr_cycles;
+	u8 bits_per_cell;
+	u8 programs_per_page;
+	u8 multi_plane_addr;
+	u8 multi_plane_op_attr;
+	u8 reserved3[38];
+
+	/* electrical parameter block */
+	__le16 async_sdr_speed_grade;
+	__le16 toggle_ddr_speed_grade;
+	__le16 sync_ddr_speed_grade;
+	u8 async_sdr_features;
+	u8 toggle_ddr_features;
+	u8 sync_ddr_features;
+	__le16 t_prog;
+	__le16 t_bers;
+	__le16 t_r;
+	__le16 t_r_multi_plane;
+	__le16 t_ccs;
+	__le16 io_pin_capacitance_typ;
+	__le16 input_pin_capacitance_typ;
+	__le16 clk_pin_capacitance_typ;
+	u8 driver_strength_support;
+	__le16 t_ald;
+	u8 reserved4[36];
+
+	/* ECC and endurance block */
+	u8 guaranteed_good_blocks;
+	__le16 guaranteed_block_endurance;
+	struct jedec_ecc_info ecc_info[4];
+	u8 reserved5[29];
+
+	/* reserved */
+	u8 reserved6[148];
+
+	/* vendor */
+	__le16 vendor_rev_num;
+	u8 reserved7[88];
+
+	/* CRC for Parameter Page */
+	__le16 crc;
+} __packed;
+
 /**
  * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices
  * @lock:               protection lock
@@ -455,7 +533,7 @@ struct nand_ecc_ctrl {
 	int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
 			uint8_t *buf, int oob_required, int page);
 	int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
-			uint32_t offs, uint32_t len, uint8_t *buf);
+			uint32_t offs, uint32_t len, uint8_t *buf, int page);
 	int (*write_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
 			uint32_t offset, uint32_t data_len,
 			const uint8_t *data_buf, int oob_required);
@@ -472,17 +550,17 @@ struct nand_ecc_ctrl {
 
 /**
  * struct nand_buffers - buffer structure for read/write
- * @ecccalc:	buffer for calculated ECC
- * @ecccode:	buffer for ECC read from flash
- * @databuf:	buffer for data - dynamically sized
+ * @ecccalc:	buffer pointer for calculated ECC, size is oobsize.
+ * @ecccode:	buffer pointer for ECC read from flash, size is oobsize.
+ * @databuf:	buffer pointer for data, size is (page size + oobsize).
  *
  * Do not change the order of buffers. databuf and oobrbuf must be in
  * consecutive order.
  */
 struct nand_buffers {
 #ifndef __UBOOT__
-	uint8_t	*ecccalc;
-	uint8_t	*ecccode;
+	uint8_t *ecccalc;
+	uint8_t *ecccode;
 	uint8_t *databuf;
 #else
 	uint8_t	ecccalc[ALIGN(NAND_MAX_OOBSIZE, ARCH_DMA_MINALIGN)];
@@ -567,8 +645,12 @@ struct nand_buffers {
  * @subpagesize:	[INTERN] holds the subpagesize
  * @onfi_version:	[INTERN] holds the chip ONFI version (BCD encoded),
  *			non 0 if ONFI supported.
+ * @jedec_version:	[INTERN] holds the chip JEDEC version (BCD encoded),
+ *			non 0 if JEDEC supported.
  * @onfi_params:	[INTERN] holds the ONFI page parameter when ONFI is
  *			supported, 0 otherwise.
+ * @jedec_params:	[INTERN] holds the JEDEC parameter page when JEDEC is
+ *			supported, 0 otherwise.
  * @read_retries:	[INTERN] the number of read retry modes supported
  * @onfi_set_features:	[REPLACEABLE] set the features for ONFI nand
  * @onfi_get_features:	[REPLACEABLE] get the features for ONFI nand
@@ -646,10 +728,12 @@ struct nand_chip {
 	int badblockbits;
 
 	int onfi_version;
+	int jedec_version;
 #ifdef CONFIG_SYS_NAND_ONFI_DETECTION
 	struct nand_onfi_params	onfi_params;
 #endif
-
+	struct nand_jedec_params jedec_params;
+ 
 	int read_retries;
 
 	flstate_t state;
@@ -923,6 +1007,13 @@ static inline int nand_opcode_8bits(unsigned int command)
 	return 0;
 }
 
+/* return the supported JEDEC features. */
+static inline int jedec_feature(struct nand_chip *chip)
+{
+	return chip->jedec_version ? le16_to_cpu(chip->jedec_params.features)
+		: 0;
+}
+
 #ifdef __UBOOT__
 /* Standard NAND functions from nand_base.c */
 void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len);