X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fi2c.h;h=33570f5404f144f07ef9ec2682ff9ad2a521d688;hb=476e991452433b72f280147c93435ccd9423639f;hp=2c1643d65067d3400bbf81a0a0b24ae63fc7b32a;hpb=c2774e6149a6bedb0941deefec84665119e685a4;p=oweals%2Fu-boot.git diff --git a/include/i2c.h b/include/i2c.h index 2c1643d650..33570f5404 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2009 Sergey Kubushyn * Copyright (C) 2009 - 2013 Heiko Schocher @@ -6,8 +7,6 @@ * (C) Copyright 2001 * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com. * - * SPDX-License-Identifier: GPL-2.0+ - * * The original I2C interface was * (C) 2000 by Paolo Scaffardi (arsenio@tin.it) * AIRVENT SAM s.p.a - RIMINI(ITALY) @@ -69,9 +68,11 @@ struct dm_i2c_chip { * I2C bus udevice. * * @speed_hz: Bus speed in hertz (typically 100000) + * @max_transaction_bytes: Maximal size of single I2C transfer */ struct dm_i2c_bus { int speed_hz; + int max_transaction_bytes; }; /* @@ -270,86 +271,6 @@ int i2c_get_chip_offset_len(struct udevice *dev); */ int i2c_deblock(struct udevice *bus); -#ifdef CONFIG_DM_I2C_COMPAT -/** - * i2c_probe() - Compatibility function for driver model - * - * Calls dm_i2c_probe() on the current bus - */ -int i2c_probe(uint8_t chip_addr); - -/** - * i2c_read() - Compatibility function for driver model - * - * Calls dm_i2c_read() with the device corresponding to @chip_addr, and offset - * set to @addr. @alen must match the current setting for the device. - */ -int i2c_read(uint8_t chip_addr, unsigned int addr, int alen, uint8_t *buffer, - int len); - -/** - * i2c_write() - Compatibility function for driver model - * - * Calls dm_i2c_write() with the device corresponding to @chip_addr, and offset - * set to @addr. @alen must match the current setting for the device. - */ -int i2c_write(uint8_t chip_addr, unsigned int addr, int alen, uint8_t *buffer, - int len); - -/** - * i2c_get_bus_num_fdt() - Compatibility function for driver model - * - * @return the bus number associated with the given device tree node - */ -int i2c_get_bus_num_fdt(int node); - -/** - * i2c_get_bus_num() - Compatibility function for driver model - * - * @return the 'current' bus number - */ -unsigned int i2c_get_bus_num(void); - -/** - * i2c_set_bus_num() - Compatibility function for driver model - * - * Sets the 'current' bus - */ -int i2c_set_bus_num(unsigned int bus); - -static inline void I2C_SET_BUS(unsigned int bus) -{ - i2c_set_bus_num(bus); -} - -static inline unsigned int I2C_GET_BUS(void) -{ - return i2c_get_bus_num(); -} - -/** - * i2c_init() - Compatibility function for driver model - * - * This function does nothing. - */ -void i2c_init(int speed, int slaveaddr); - -/** - * board_i2c_init() - Compatibility function for driver model - * - * @param blob Device tree blbo - * @return the number of I2C bus - */ -void board_i2c_init(const void *blob); - -/* - * Compatibility functions for driver model. - */ -uint8_t i2c_reg_read(uint8_t addr, uint8_t reg); -void i2c_reg_write(uint8_t addr, uint8_t reg, uint8_t val); - -#endif - /** * struct dm_i2c_ops - driver operations for I2C uclass * @@ -525,8 +446,7 @@ int i2c_get_chip_for_busnum(int busnum, int chip_addr, uint offset_len, * @node: Node offset to read from * @spi: Place to put the decoded information */ -int i2c_chip_ofdata_to_platdata(const void *blob, int node, - struct dm_i2c_chip *chip); +int i2c_chip_ofdata_to_platdata(struct udevice *dev, struct dm_i2c_chip *chip); /** * i2c_dump_msgs() - Dump a list of I2C messages @@ -538,6 +458,27 @@ int i2c_chip_ofdata_to_platdata(const void *blob, int node, */ void i2c_dump_msgs(struct i2c_msg *msg, int nmsgs); +/** + * i2c_emul_find() - Find an emulator for an i2c sandbox device + * + * This looks at the device's 'emul' phandle + * + * @dev: Device to find an emulator for + * @emulp: Returns the associated emulator, if found * + * @return 0 if OK, -ENOENT or -ENODEV if not found + */ +int i2c_emul_find(struct udevice *dev, struct udevice **emulp); + +/** + * i2c_emul_get_device() - Find the device being emulated + * + * Given an emulator this returns the associated device + * + * @emul: Emulator for the device + * @return device that @emul is emulating + */ +struct udevice *i2c_emul_get_device(struct udevice *emul); + #ifndef CONFIG_DM_I2C /* @@ -661,12 +602,7 @@ extern struct i2c_bus_hose i2c_bus[]; #endif #ifndef I2C_SOFT_DECLARATIONS -# if defined(CONFIG_MPC8260) -# define I2C_SOFT_DECLARATIONS volatile ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, I2C_PORT); -# elif defined(CONFIG_8xx) -# define I2C_SOFT_DECLARATIONS volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; - -# elif (defined(CONFIG_AT91RM9200) || \ +# if (defined(CONFIG_AT91RM9200) || \ defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9261) || \ defined(CONFIG_AT91SAM9263)) # define I2C_SOFT_DECLARATIONS at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; @@ -675,15 +611,6 @@ extern struct i2c_bus_hose i2c_bus[]; # endif #endif -#ifdef CONFIG_8xx -/* Set default value for the I2C bus speed on 8xx. In the - * future, we'll define these in all 8xx board config files. - */ -#ifndef CONFIG_SYS_I2C_SPEED -#define CONFIG_SYS_I2C_SPEED 50000 -#endif -#endif - /* * Many boards/controllers/drivers don't support an I2C slave interface so * provide a default slave address for them for use in common code. A real @@ -815,11 +742,6 @@ static inline u8 i2c_reg_read(u8 addr, u8 reg) { u8 buf; -#ifdef CONFIG_8xx - /* MPC8xx needs this. Maybe one day we can get rid of it. */ - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); -#endif - #ifdef DEBUG printf("%s: addr=0x%02x, reg=0x%02x\n", __func__, addr, reg); #endif @@ -831,11 +753,6 @@ static inline u8 i2c_reg_read(u8 addr, u8 reg) static inline void i2c_reg_write(u8 addr, u8 reg, u8 val) { -#ifdef CONFIG_8xx - /* MPC8xx needs this. Maybe one day we can get rid of it. */ - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); -#endif - #ifdef DEBUG printf("%s: addr=0x%02x, reg=0x%02x, val=0x%02x\n", __func__, addr, reg, val);