X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Ffsl_ddr_sdram.h;h=486e47e508d0741a29600220bb1b45b2770cbc1c;hb=0586e22783ca3d575ad86b1a0656875ee071489a;hp=6358b6f3a278b7c17ff53cd95b6a3973d4919414;hpb=9f9f0093730f91d95cb8e9546155ae6a3286159e;p=oweals%2Fu-boot.git

diff --git a/include/fsl_ddr_sdram.h b/include/fsl_ddr_sdram.h
index 6358b6f3a2..486e47e508 100644
--- a/include/fsl_ddr_sdram.h
+++ b/include/fsl_ddr_sdram.h
@@ -1,9 +1,7 @@
 /*
  * Copyright 2008-2014 Freescale Semiconductor, Inc.
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
+ * SPDX-License-Identifier:	GPL-2.0
  */
 
 #ifndef FSL_DDR_MEMCTL_H
@@ -33,6 +31,15 @@
 #define DDR3_RTT_20_OHM		4 /* RTT_Nom = RZQ/12 */
 #define DDR3_RTT_30_OHM		5 /* RTT_Nom = RZQ/8 */
 
+#define DDR4_RTT_OFF		0
+#define DDR4_RTT_60_OHM		1	/* RZQ/4 */
+#define DDR4_RTT_120_OHM	2	/* RZQ/2 */
+#define DDR4_RTT_40_OHM		3	/* RZQ/6 */
+#define DDR4_RTT_240_OHM	4	/* RZQ/1 */
+#define DDR4_RTT_48_OHM		5	/* RZQ/5 */
+#define DDR4_RTT_80_OHM		6	/* RZQ/3 */
+#define DDR4_RTT_34_OHM		7	/* RZQ/7 */
+
 #define DDR2_RTT_OFF		0
 #define DDR2_RTT_75_OHM		1
 #define DDR2_RTT_150_OHM	2
@@ -116,12 +123,14 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
 
 #define SDRAM_CFG2_FRC_SR		0x80000000
 #define SDRAM_CFG2_D_INIT		0x00000010
+#define SDRAM_CFG2_AP_EN		0x00000020
 #define SDRAM_CFG2_ODT_CFG_MASK		0x00600000
 #define SDRAM_CFG2_ODT_NEVER		0
 #define SDRAM_CFG2_ODT_ONLY_WRITE	1
 #define SDRAM_CFG2_ODT_ONLY_READ	2
 #define SDRAM_CFG2_ODT_ALWAYS		3
 
+#define SDRAM_INTERVAL_BSTOPRE	0x3FFF
 #define TIMING_CFG_2_CPO_MASK	0x0F800000
 
 #if defined(CONFIG_SYS_FSL_DDR_VER) && \
@@ -137,6 +146,10 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
 #define WR_DATA_DELAY_SHIFT	10
 #endif
 
+/* DDR_EOR register */
+#define DDR_EOR_RD_REOD_DIS	0x07000000
+#define DDR_EOR_WD_REOD_DIS	0x00100000
+
 /* DDR_MD_CNTL */
 #define MD_CNTL_MD_EN		0x80000000
 #define MD_CNTL_CS_SEL_CS0	0x00000000
@@ -167,6 +180,22 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
 #define DDR_CDR2_ODT(x) (x & DDR_CDR2_ODT_MASK)
 #define DDR_CDR2_VREF_OVRD(x)	(0x00008080 | ((((x) - 37) & 0x3F) << 8))
 #define DDR_CDR2_VREF_TRAIN_EN	0x00000080
+#define DDR_CDR2_VREF_RANGE_2	0x00000040
+
+/* DDR ERR_DISABLE */
+#define DDR_ERR_DISABLE_APED	(1 << 8)  /* Address parity error disable */
+
+/* Mode Registers */
+#define DDR_MR5_CA_PARITY_LAT_4_CLK	0x1 /* for DDR4-1600/1866/2133 */
+#define DDR_MR5_CA_PARITY_LAT_5_CLK	0x2 /* for DDR4-2400 */
+
+/* DEBUG_26 register */
+#define DDR_CAS_TO_PRE_SUB_MASK  0x0000f000 /* CAS to preamble subtract value */
+#define DDR_CAS_TO_PRE_SUB_SHIFT 12
+
+/* DEBUG_29 register */
+#define DDR_TX_BD_DIS	(1 << 10) /* Transmit Bit Deskew Disable */
+
 
 #if (defined(CONFIG_SYS_FSL_DDR_VER) && \
 	(CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7))
@@ -323,6 +352,8 @@ typedef struct memctl_options_s {
 	unsigned int dqs_config;	/* Use DQS? maybe only with DDR2? */
 	/* SREN - self-refresh during sleep */
 	unsigned int self_refresh_in_sleep;
+	/* SR_IE - Self-refresh interrupt enable */
+	unsigned int self_refresh_interrupt_en;
 	unsigned int dynamic_power;	/* DYN_PWR */
 	/* memory data width to use (16-bit, 32-bit, 64-bit) */
 	unsigned int data_bus_width;
@@ -332,7 +363,7 @@ typedef struct memctl_options_s {
 	/* mirrior DIMMs for DDR3 */
 	unsigned int mirrored_dimm;
 	unsigned int quad_rank_present;
-	unsigned int ap_en;	/* address parity enable for RDIMM */
+	unsigned int ap_en;	/* address parity enable for RDIMM/DDR4-UDIMM */
 	unsigned int x4_en;	/* enable x4 devices */
 
 	/* Global Timing Parameters */