X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Ffdt_support.h;h=2eff311fa4f577e8099a51ac82d8003b01e4eebb;hb=7bb62708397d93d92804749b4c4c8d796df418de;hp=1f19fe4c9622a84c365f500ff80b2b72bb61baf1;hpb=bd5053ffa5b8162257537bdb79ba829372423096;p=oweals%2Fu-boot.git diff --git a/include/fdt_support.h b/include/fdt_support.h index 1f19fe4c96..2eff311fa4 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -1,8 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2007 * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com - * - * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __FDT_SUPPORT_H @@ -10,14 +9,56 @@ #ifdef CONFIG_OF_LIBFDT -#include +#include +#include + +/** + * arch_fixup_fdt() - Write arch-specific information to fdt + * + * Defined in arch/$(ARCH)/lib/bootm-fdt.c + * + * @blob: FDT blob to write to + * @return 0 if ok, or -ve FDT_ERR_... on failure + */ +int arch_fixup_fdt(void *blob); + +void ft_cpu_setup(void *blob, bd_t *bd); + +void ft_pci_setup(void *blob, bd_t *bd); u32 fdt_getprop_u32_default_node(const void *fdt, int off, int cell, const char *prop, const u32 dflt); u32 fdt_getprop_u32_default(const void *fdt, const char *path, const char *prop, const u32 dflt); + +/** + * Add data to the root of the FDT before booting the OS. + * + * See doc/device-tree-bindings/root.txt + * + * @param fdt FDT address in memory + * @return 0 if ok, or -FDT_ERR_... on error + */ +int fdt_root(void *fdt); + +/** + * Add chosen data the FDT before booting the OS. + * + * In particular, this adds the kernel command line (bootargs) to the FDT. + * + * @param fdt FDT address in memory + * @return 0 if ok, or -FDT_ERR_... on error + */ int fdt_chosen(void *fdt); + +/** + * Add initrd information to the FDT before booting the OS. + * + * @param fdt FDT address in memory + * @return 0 if ok, or -FDT_ERR_... on error + */ int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end); + void do_fixup_by_path(void *fdt, const char *path, const char *prop, const void *val, int len, int create); void do_fixup_by_path_u32(void *fdt, const char *path, const char *prop, @@ -40,18 +81,66 @@ void do_fixup_by_compat(void *fdt, const char *compat, const char *prop, const void *val, int len, int create); void do_fixup_by_compat_u32(void *fdt, const char *compat, const char *prop, u32 val, int create); +/** + * Setup the memory node in the DT. Creates one if none was existing before. + * Calls fdt_fixup_memory_banks() to populate a single reg pair covering the + * whole memory. + * + * @param blob FDT blob to update + * @param start Begin of DRAM mapping in physical memory + * @param size Size of the single memory bank + * @return 0 if ok, or -1 or -FDT_ERR_... on error + */ int fdt_fixup_memory(void *blob, u64 start, u64 size); + +/** + * Fill the DT memory node with multiple memory banks. + * Creates the node if none was existing before. + * If banks is 0, it will not touch the existing reg property. This allows + * boards to not mess with the existing DT setup, which may have been + * filled in properly before. + * + * @param blob FDT blob to update + * @param start Array of size to hold the start addresses. + * @param size Array of size to hold the size of each region. + * @param banks Number of memory banks to create. If 0, the reg + * property will be left untouched. + * @return 0 if ok, or -1 or -FDT_ERR_... on error + */ +#ifdef CONFIG_ARCH_FIXUP_FDT_MEMORY int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks); +int fdt_set_usable_memory(void *blob, u64 start[], u64 size[], int banks); +#else +static inline int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], + int banks) +{ + return 0; +} +#endif + void fdt_fixup_ethernet(void *fdt); int fdt_find_and_setprop(void *fdt, const char *node, const char *prop, const void *val, int len, int create); void fdt_fixup_qe_firmware(void *fdt); -#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) -void fdt_fixup_dr_usb(void *blob, bd_t *bd); +/** + * Update native-mode property of display-timings node to the phandle + * of the timings matching a display by name (case insensitive). + * + * see kernel Documentation/devicetree/bindings/video/display-timing.txt + * + * @param blob FDT blob to update + * @param path path within dt + * @param display name of display timing to match + * @return 0 if ok, or -FDT_ERR_... on error + */ +int fdt_fixup_display(void *blob, const char *path, const char *display); + +#if defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL) +void fsl_fdt_fixup_dr_usb(void *blob, bd_t *bd); #else -static inline void fdt_fixup_dr_usb(void *blob, bd_t *bd) {} -#endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */ +static inline void fsl_fdt_fixup_dr_usb(void *blob, bd_t *bd) {} +#endif /* defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL) */ #if defined(CONFIG_SYS_FSL_SEC_COMPAT) void fdt_fixup_crypto_node(void *blob, int sec_rev); @@ -59,6 +148,24 @@ void fdt_fixup_crypto_node(void *blob, int sec_rev); static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {} #endif +/** + * Record information about a processed loadable in /fit-images (creating + * /fit-images if necessary). + * + * @param blob FDT blob to update + * @param index index of this loadable + * @param name name of the loadable + * @param load_addr address the loadable was loaded to + * @param size number of bytes loaded + * @param entry_point entry point (if specified, otherwise pass -1) + * @param type type (if specified, otherwise pass NULL) + * @param os os-type (if specified, otherwise pass NULL) + * @return 0 if ok, or -1 or -FDT_ERR_... on error + */ +int fdt_record_loadable(void *blob, u32 index, const char *name, + uintptr_t load_addr, u32 size, uintptr_t entry_point, + const char *type, const char *os); + #ifdef CONFIG_PCI #include int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose); @@ -100,15 +207,59 @@ void ft_pci_setup(void *blob, bd_t *bd); */ int ft_system_setup(void *blob, bd_t *bd); -void set_working_fdt_addr(void *addr); -int fdt_shrink_to_minimum(void *blob); +void set_working_fdt_addr(ulong addr); + +/** + * shrink down the given blob to minimum size + some extrasize if required + * + * @param blob FDT blob to update + * @param extrasize additional bytes needed + * @return 0 if ok, or -FDT_ERR_... on error + */ +int fdt_shrink_to_minimum(void *blob, uint extrasize); int fdt_increase_size(void *fdt, int add_len); int fdt_fixup_nor_flash_size(void *blob); -void fdt_fixup_mtdparts(void *fdt, void *node_info, int node_info_size); +struct node_info; +#if defined(CONFIG_FDT_FIXUP_PARTITIONS) +void fdt_fixup_mtdparts(void *fdt, const struct node_info *node_info, + int node_info_size); +#else +static inline void fdt_fixup_mtdparts(void *fdt, + const struct node_info *node_info, + int node_info_size) +{ +} +#endif + void fdt_del_node_and_alias(void *blob, const char *alias); -u64 fdt_translate_address(void *blob, int node_offset, const __be32 *in_addr); + +/** + * Translate an address from the DT into a CPU physical address + * + * The translation relies on the "ranges" property. + * + * @param blob Pointer to device tree blob + * @param node_offset Node DT offset + * @param in_addr Pointer to the address to translate + * @return translated address or OF_BAD_ADDR on error + */ +u64 fdt_translate_address(const void *blob, int node_offset, + const __be32 *in_addr); +/** + * Translate a DMA address from the DT into a CPU physical address + * + * The translation relies on the "dma-ranges" property. + * + * @param blob Pointer to device tree blob + * @param node_offset Node DT offset + * @param in_addr Pointer to the DMA address to translate + * @return translated DMA address or OF_BAD_ADDR on error + */ +u64 fdt_translate_dma_address(const void *blob, int node_offset, + const __be32 *in_addr); + int fdt_node_offset_by_compat_reg(void *blob, const char *compat, phys_addr_t compat_off); int fdt_alloc_phandle(void *blob); @@ -118,7 +269,7 @@ int fdt_add_edid(void *blob, const char *compat, unsigned char *buf); int fdt_verify_alias_address(void *fdt, int anode, const char *alias, u64 addr); -u64 fdt_get_base_address(void *fdt, int node); +u64 fdt_get_base_address(const void *fdt, int node); int fdt_read_range(void *fdt, int node, int n, uint64_t *child_addr, uint64_t *addr, uint64_t *len); @@ -159,7 +310,7 @@ static inline int fdt_status_fail_by_alias(void *fdt, const char *alias) } /* Helper to read a big number; size is in cells (not bytes) */ -static inline u64 of_read_number(const fdt32_t *cell, int size) +static inline u64 fdt_read_number(const fdt32_t *cell, int size) { u64 r = 0; while (size--) @@ -167,7 +318,7 @@ static inline u64 of_read_number(const fdt32_t *cell, int size) return r; } -void of_bus_default_count_cells(void *blob, int parentoffset, +void fdt_support_default_count_cells(const void *blob, int parentoffset, int *addrc, int *sizec); int ft_verify_fdt(void *fdt); int arch_fixup_memory_node(void *blob); @@ -175,10 +326,37 @@ int arch_fixup_memory_node(void *blob); int fdt_setup_simplefb_node(void *fdt, int node, u64 base_address, u32 width, u32 height, u32 stride, const char *format); +int fdt_overlay_apply_verbose(void *fdt, void *fdto); + +/** + * fdt_get_cells_len() - Get the length of a type of cell in top-level nodes + * + * Returns the length of the cell type in bytes (4 or 8). + * + * @blob: Pointer to device tree blob + * @nr_cells_name: Name to lookup, e.g. "#address-cells" + */ +int fdt_get_cells_len(const void *blob, char *nr_cells_name); + #endif /* ifdef CONFIG_OF_LIBFDT */ #ifdef USE_HOSTCC int fdtdec_get_int(const void *blob, int node, const char *prop_name, int default_val); + +/* + * Count child nodes of one parent node. + * + * @param blob FDT blob + * @param node parent node + * @return number of child node; 0 if there is not child node + */ +int fdtdec_get_child_count(const void *blob, int node); +#endif +#ifdef CONFIG_FMAN_ENET +int fdt_update_ethernet_dt(void *blob); +#endif +#ifdef CONFIG_FSL_MC_ENET +void fdt_fixup_board_enet(void *blob); #endif #endif /* ifndef __FDT_SUPPORT_H */