X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fzmx25.h;h=a8c6f0be10d4856c8ce98b85cee1174546cd5e9e;hb=dd7e7feb4430accb73a140c9539253ec1e11276b;hp=599d5bb42aacc9f3a9b24106b958f27a763c6acc;hpb=40f6fffee5917930597bfcc07de1cd879d4994f6;p=oweals%2Fu-boot.git

diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h
index 599d5bb42a..a8c6f0be10 100644
--- a/include/configs/zmx25.h
+++ b/include/configs/zmx25.h
@@ -1,36 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (c) 2011 Graf-Syteco, Matthias Weisser
  * <weisserm@arcor.de>
  *
  * Configuation settings for the zmx25 board
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_ARM926EJS			/* arm926ejs CPU core */
-#define CONFIG_MX25
-#define CONFIG_MX25_CLK32		32768	/* OSC32K frequency */
-#define CONFIG_SYS_HZ			1000
-#define CONFIG_SYS_TEXT_BASE		0xA0000000
+#include <asm/arch/imx-regs.h>
+
+#define CONFIG_SYS_TIMER_RATE		32768
+#define CONFIG_SYS_TIMER_COUNTER	\
+	(&((struct gpt_regs *)IMX_GPT1_BASE)->counter)
 
 #define CONFIG_MACH_TYPE	MACH_TYPE_ZMX25
 /*
@@ -46,85 +29,49 @@
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs	*/
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
-#define CONFIG_BOARD_LATE_INIT
-
-/*
- * Compressions
- */
-#define CONFIG_LZO
 
 /*
  * Hardware drivers
  */
 
-/*
- * GPIO
- */
-#define CONFIG_MXC_GPIO
-
 /*
  * Serial
  */
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE	UART2_BASE
-#define CONFIG_CONS_INDEX	1	/* use UART2 for console */
-#define CONFIG_BAUDRATE		115200	/* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Ethernet
  */
 #define CONFIG_FEC_MXC
 #define CONFIG_FEC_MXC_PHYADDR		0x00
-#define CONFIG_MII
 
 /*
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_CACHE
-
-#define CONFIG_SYS_64BIT_VSPRINTF
 
 /*
  * Additional command
  */
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_USB
-
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 
 /*
  * USB
  */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI			/* Enable EHCI USB support */
 #define CONFIG_USB_EHCI_MXC
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_MXC_USB_PORT	2
-#define CONFIG_MXC_USB_PORTSC	0xC0000000
-#define CONFIG_MXC_USB_FLAGS	0
+#define CONFIG_MXC_USB_PORT	1
+#define CONFIG_MXC_USB_PORTSC	MXC_EHCI_MODE_SERIAL
+#define CONFIG_MXC_USB_FLAGS	(MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN)
 #define CONFIG_EHCI_IS_TDI
-#define CONFIG_USB_STORAGE
-#define CONFIG_DOS_PARTITION
-#define CONFIG_SUPPORT_VFAT
 #endif /* CONFIG_CMD_USB */
 
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS	1
 #define PHYS_SDRAM		0x80000000	/* start address of LPDDRRAM */
 #define PHYS_SDRAM_SIZE		0x04000000	/* 64 megs */
 
@@ -138,43 +85,19 @@
 #define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define CONFIG_SYS_MAX_FLASH_SECT	256
 
-#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x00040000)
-#define CONFIG_ENV_IS_IN_FLASH		1
-#define CONFIG_ENV_SECT_SIZE		(128 * 1024)
-#define CONFIG_ENV_SIZE			(128 * 1024)
-
 /*
  * CFI FLASH driver setup
  */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	/* ~10x faster */
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE
 
 #define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM + (512*1024))
 #define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM + PHYS_SDRAM_SIZE)
 
-#define CONFIG_SYS_PROMPT	"zmx25> "
-#define CONFIG_SYS_CBSIZE	256
-#define CONFIG_SYS_MAXARGS	16
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
-				sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-
-#define CONFIG_PREBOOT  ""
-
-#define CONFIG_BOOTDELAY	5
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT "boot in %d s\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR	"delaygs"
-#define CONFIG_AUTOBOOT_STOP_STR	"stopgs"
 
 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN		(0x400000 - 0x8000)
-#define CONFIG_STACKSIZE		(32*1024)	/* regular stack */
 
 #endif	/* __CONFIG_H */