X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fxupv2p.h;h=570d6a8021c746b6ba5561ea51fd94126fddaf0d;hb=42fd5f87b1613d3039f57e93c16f760a768d3e84;hp=a2f48102f0ca676d9a06f51e47e2618df6b111e0;hpb=1d10b9e99d1b4a6a880d424ec791cde45cb04614;p=oweals%2Fu-boot.git

diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h
index a2f48102f0..570d6a8021 100644
--- a/include/configs/xupv2p.h
+++ b/include/configs/xupv2p.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2007 Czech Technical University.
+ * (C) Copyright 2007-2008 Michal Simek
  *
  * Michal SIMEK <monstr@monstr.eu>
  *
@@ -31,13 +31,23 @@
 #define	CONFIG_XUPV2P		1
 
 /* uart */
-#define	CONFIG_SERIAL_BASE	XILINX_UART_BASEADDR
-#define	CONFIG_BAUDRATE		XILINX_UART_BAUDRATE
+#ifdef XILINX_UARTLITE_BASEADDR
+#define	CONFIG_XILINX_UARTLITE
+#define	CONFIG_SERIAL_BASE	XILINX_UARTLITE_BASEADDR
+#define	CONFIG_BAUDRATE		XILINX_UARTLITE_BAUDRATE
 #define	CFG_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
-
-/* ethernet */
-#define CONFIG_EMAC	1
-#define XPAR_EMAC_0_DEVICE_ID	XPAR_XEMAC_NUM_INSTANCES
+#else
+#ifdef XILINX_UART16550_BASEADDR
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	4
+#define CONFIG_CONS_INDEX	1
+#define CFG_NS16550_COM1	XILINX_UART16550_BASEADDR
+#define CFG_NS16550_CLK		XILINX_UART16550_CLOCK_HZ
+#define	CONFIG_BAUDRATE		115200
+#define	CFG_BAUDRATE_TABLE	{ 9600, 115200 }
+#endif
+#endif
 
 /*
  * setting reset address
@@ -48,24 +58,49 @@
  * U-BOOT auto-relocate to TEXT_BASE. After RESET command Microblaze
  * jump to CFG_RESET_ADDRESS where is the original U-BOOT code.
  */
-#define	CFG_RESET_ADDRESS	0x36000000
+/* #define	CFG_RESET_ADDRESS	0x36000000 */
+
+/* ethernet */
+#ifdef XILINX_EMAC_BASEADDR
+#define CONFIG_XILINX_EMAC	1
+#define CFG_ENET
+#else
+#ifdef XILINX_EMACLITE_BASEADDR
+#define CONFIG_XILINX_EMACLITE	1
+#define CFG_ENET
+#endif
+#endif
+#undef ET_DEBUG
 
 /* gpio */
+#ifdef XILINX_GPIO_BASEADDR
 #define	CFG_GPIO_0		1
 #define	CFG_GPIO_0_ADDR		XILINX_GPIO_BASEADDR
+#endif
 
 /* interrupt controller */
+#ifdef XILINX_INTC_BASEADDR
 #define	CFG_INTC_0		1
 #define	CFG_INTC_0_ADDR		XILINX_INTC_BASEADDR
 #define	CFG_INTC_0_NUM		XILINX_INTC_NUM_INTR_INPUTS
+#endif
 
 /* timer */
+#ifdef XILINX_TIMER_BASEADDR
+#if (XILINX_TIMER_IRQ != -1)
 #define	CFG_TIMER_0		1
 #define	CFG_TIMER_0_ADDR	XILINX_TIMER_BASEADDR
 #define	CFG_TIMER_0_IRQ		XILINX_TIMER_IRQ
 #define	FREQUENCE		XILINX_CLOCK_FREQ
 #define	CFG_TIMER_0_PRELOAD	( FREQUENCE/1000 )
-
+#endif
+#else
+#ifdef XILINX_CLOCK_FREQ
+#define	CONFIG_XILINX_CLOCK_FREQ	XILINX_CLOCK_FREQ
+#else
+#error BAD CLOCK FREQ
+#endif
+#endif
 /*
  * memory layout - Example
  * TEXT_BASE = 0x3600_0000;
@@ -89,7 +124,7 @@
  * 0x3FFB_F000	CFG_MONITOR_BASE
  *					MONITOR_CODE	256kB	Env
  * 0x3FFF_F000	CFG_GBL_DATA_OFFSET
- * 					GLOBAL_DATA	4kB	bd, gd
+ *					GLOBAL_DATA	4kB	bd, gd
  * 0x4000_0000	CFG_SDRAM_BASE + CFG_SDRAM_SIZE
  */
 
@@ -118,25 +153,38 @@
 #define	CFG_ENV_IS_NOWHERE	1
 #define	CFG_ENV_SIZE		0x1000
 #define	CFG_ENV_ADDR		(CFG_MONITOR_BASE - CFG_ENV_SIZE)
-#define	CONFIG_COMMANDS	(CONFIG__CMD_DFL |\
-			CFG_CMD_MEMORY |\
-			CFG_CMD_IRQ |\
-			CFG_CMD_BDI |\
-			CFG_CMD_NET |\
-			CFG_CMD_IMI |\
-			CFG_CMD_ECHO |\
-			CFG_CMD_CACHE |\
-			CFG_CMD_RUN |\
-			CFG_CMD_AUTOSCRIPT |\
-			CFG_CMD_ASKENV |\
-			CFG_CMD_LOADS |\
-			CFG_CMD_LOADB |\
-			CFG_CMD_MISC |\
-			CFG_CMD_PING \
-			)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_JFFS2
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_IRQ
+
+#ifndef CFG_ENET
+	#undef CONFIG_CMD_NET
+#else
+	#define CONFIG_CMD_PING
+#endif
+
+#ifdef XILINX_SYSACE_BASEADDR
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#endif
 
 /* Miscellaneous configurable options */
 #define	CFG_PROMPT	"U-Boot-mONStR> "
@@ -146,13 +194,13 @@
 #define	CFG_LONGHELP
 #define	CFG_LOAD_ADDR	0x12000000 /* default load address */
 
-#define	CONFIG_BOOTDELAY 	30
+#define	CONFIG_BOOTDELAY	30
 #define	CONFIG_BOOTARGS		"root=romfs"
-#define	CONFIG_HOSTNAME		"ml401"
-#define	CONFIG_BOOTCOMMAND 	"base 0;tftp 11000000 image.img;bootm"
+#define	CONFIG_HOSTNAME		"xupv2p"
+#define	CONFIG_BOOTCOMMAND	"base 0;tftp 11000000 image.img;bootm"
 #define	CONFIG_IPADDR		192.168.0.3
-#define	CONFIG_SERVERIP 	192.168.0.5
-#define	CONFIG_GATEWAYIP 	192.168.0.1
+#define	CONFIG_SERVERIP		192.168.0.5
+#define	CONFIG_GATEWAYIP	192.168.0.1
 #define	CONFIG_ETHADDR		00:E0:0C:00:00:FD
 
 /* architecture dependent code */
@@ -163,12 +211,17 @@
 	"base 0;" \
 	"echo"
 
-
 /* system ace */
-/*#define	CONFIG_SYSTEMACE
-#define	DEBUG_SYSTEMACE
-#define	CFG_SYSTEMACE_BASE	0xCF000000
-#define	CFG_SYSTEMACE_WIDTH	16
-#define	CONFIG_DOS_PARTITION*/
+#ifdef XILINX_SYSACE_BASEADDR
+#define	CONFIG_SYSTEMACE
+/* #define DEBUG_SYSTEMACE */
+#define	SYSTEMACE_CONFIG_FPGA
+#define	CFG_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
+#define	CFG_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
+#define	CONFIG_DOS_PARTITION
+#endif
+
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_OF_LIBFDT	1 /* flat device tree */
 
 #endif	/* __CONFIG_H */