X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fxupv2p.h;h=30fb303c9613c01a8167e12fb6dbaea19574d735;hb=7cc399c86b26abaa95f65dda0a37413dd3c77167;hp=bac31f476b0521a94804c7324986965cda5e2094;hpb=af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f;p=oweals%2Fu-boot.git

diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h
index bac31f476b..30fb303c96 100644
--- a/include/configs/xupv2p.h
+++ b/include/configs/xupv2p.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2007 Czech Technical University.
+ * (C) Copyright 2007-2008 Michal Simek
  *
  * Michal SIMEK <monstr@monstr.eu>
  *
@@ -32,7 +32,7 @@
 
 /* uart */
 #ifdef XILINX_UARTLITE_BASEADDR
-#define	XILINX_UARTLITE
+#define	CONFIG_XILINX_UARTLITE
 #define	CONFIG_SERIAL_BASE	XILINX_UARTLITE_BASEADDR
 #define	CONFIG_BAUDRATE		XILINX_UARTLITE_BAUDRATE
 #define	CFG_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
@@ -44,22 +44,11 @@
 #define CONFIG_CONS_INDEX	1
 #define CFG_NS16550_COM1	XILINX_UART16550_BASEADDR
 #define CFG_NS16550_CLK		XILINX_UART16550_CLOCK_HZ
-
 #define	CONFIG_BAUDRATE		115200
 #define	CFG_BAUDRATE_TABLE	{ 9600, 115200 }
 #endif
 #endif
 
-/* ethernet */
-#ifdef XILINX_EMAC_BASEADDR
-#define XILINX_EMAC	1
-#else
-#ifdef XILINX_EMACLITE_BASEADDR
-#define XILINX_EMACLITE	1
-#endif
-#endif
-#undef ET_DEBUG
-
 /*
  * setting reset address
  *
@@ -71,6 +60,16 @@
  */
 /* #define	CFG_RESET_ADDRESS	0x36000000 */
 
+/* ethernet */
+#ifdef XILINX_EMAC_BASEADDR
+#define CONFIG_XILINX_EMAC	1
+#else
+#ifdef XILINX_EMACLITE_BASEADDR
+#define CONFIG_XILINX_EMACLITE	1
+#endif
+#endif
+#undef ET_DEBUG
+
 /* gpio */
 #ifdef XILINX_GPIO_BASEADDR
 #define	CFG_GPIO_0		1
@@ -88,6 +87,7 @@
 #define	CFG_TIMER_0_IRQ		XILINX_TIMER_IRQ
 #define	FREQUENCE		XILINX_CLOCK_FREQ
 #define	CFG_TIMER_0_PRELOAD	( FREQUENCE/1000 )
+#define	CONFIG_XILINX_CLOCK_FREQ	XILINX_CLOCK_FREQ
 
 /*
  * memory layout - Example
@@ -141,48 +141,33 @@
 #define	CFG_ENV_IS_NOWHERE	1
 #define	CFG_ENV_SIZE		0x1000
 #define	CFG_ENV_ADDR		(CFG_MONITOR_BASE - CFG_ENV_SIZE)
-#ifndef XILINX_SYSACE_BASEADDR
-#define	CONFIG_COMMANDS	(CONFIG__CMD_DFL |\
-			CFG_CMD_MEMORY |\
-			CFG_CMD_IRQ |\
-			CFG_CMD_BDI |\
-			CFG_CMD_NET |\
-			CFG_CMD_IMI |\
-			CFG_CMD_ECHO |\
-			CFG_CMD_CACHE |\
-			CFG_CMD_RUN |\
-			CFG_CMD_AUTOSCRIPT |\
-			CFG_CMD_ASKENV |\
-			CFG_CMD_LOADS |\
-			CFG_CMD_LOADB |\
-			CFG_CMD_MISC |\
-			CFG_CMD_MFSL |\
-			CFG_CMD_PING \
-			)
-#else
-#define	CONFIG_COMMANDS	(CONFIG__CMD_DFL |\
-			CFG_CMD_MEMORY |\
-			CFG_CMD_IRQ |\
-			CFG_CMD_BDI |\
-			CFG_CMD_NET |\
-			CFG_CMD_IMI |\
-			CFG_CMD_ECHO |\
-			CFG_CMD_CACHE |\
-			CFG_CMD_RUN |\
-			CFG_CMD_AUTOSCRIPT |\
-			CFG_CMD_ASKENV |\
-			CFG_CMD_LOADS |\
-			CFG_CMD_LOADB |\
-			CFG_CMD_MISC |\
-			CFG_CMD_FAT |\
-			CFG_CMD_EXT2 |\
-			CFG_CMD_MFSL |\
-			CFG_CMD_PING \
-			)
-#endif
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_JFFS2
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_PING
+
+#ifdef XILINX_SYSACE_BASEADDR
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#endif
 
 /* Miscellaneous configurable options */
 #define	CFG_PROMPT	"U-Boot-mONStR> "
@@ -219,4 +204,7 @@
 #define	CONFIG_DOS_PARTITION
 #endif
 
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_OF_LIBFDT	1 /* flat device tree */
+
 #endif	/* __CONFIG_H */