X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fxupv2p.h;h=006a132881d86b5802943a069cc17d0b5e193871;hb=9c73f4b81172bc9f1b8f132450e69bcfb5b960ca;hp=35001d7ada3108e2bcba95505e7571680c1d8a57;hpb=f2c2a937d8c4a44f63ff88bf82023e03a29497a2;p=oweals%2Fu-boot.git

diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h
index 35001d7ada..006a132881 100644
--- a/include/configs/xupv2p.h
+++ b/include/configs/xupv2p.h
@@ -31,13 +31,34 @@
 #define	CONFIG_XUPV2P		1
 
 /* uart */
-#define	CONFIG_SERIAL_BASE	XILINX_UART_BASEADDR
-#define	CONFIG_BAUDRATE		XILINX_UART_BAUDRATE
+#ifdef XILINX_UARTLITE_BASEADDR
+#define	XILINX_UARTLITE
+#define	CONFIG_SERIAL_BASE	XILINX_UARTLITE_BASEADDR
+#define	CONFIG_BAUDRATE		XILINX_UARTLITE_BAUDRATE
 #define	CFG_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
+#else
+#ifdef XILINX_UART16550_BASEADDR
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	4
+#define CONFIG_CONS_INDEX	1
+#define CFG_NS16550_COM1	XILINX_UART16550_BASEADDR
+#define CFG_NS16550_CLK		XILINX_UART16550_CLOCK_HZ
+
+#define	CONFIG_BAUDRATE		115200
+#define	CFG_BAUDRATE_TABLE	{ 9600, 115200 }
+#endif
+#endif
 
 /* ethernet */
-#define CONFIG_EMAC	1
-#define XPAR_EMAC_0_DEVICE_ID	XPAR_XEMAC_NUM_INSTANCES
+#ifdef XILINX_EMAC_BASEADDR
+#define XILINX_EMAC	1
+#else
+#ifdef XILINX_EMACLITE_BASEADDR
+#define XILINX_EMACLITE	1
+#endif
+#endif
+#undef ET_DEBUG
 
 /*
  * setting reset address
@@ -48,11 +69,13 @@
  * U-BOOT auto-relocate to TEXT_BASE. After RESET command Microblaze
  * jump to CFG_RESET_ADDRESS where is the original U-BOOT code.
  */
-#define	CFG_RESET_ADDRESS	0x36000000
+/* #define	CFG_RESET_ADDRESS	0x36000000 */
 
 /* gpio */
+#ifdef XILINX_GPIO_BASEADDR
 #define	CFG_GPIO_0		1
 #define	CFG_GPIO_0_ADDR		XILINX_GPIO_BASEADDR
+#endif
 
 /* interrupt controller */
 #define	CFG_INTC_0		1
@@ -119,7 +142,6 @@
 #define	CFG_ENV_SIZE		0x1000
 #define	CFG_ENV_ADDR		(CFG_MONITOR_BASE - CFG_ENV_SIZE)
 
-
 /*
  * BOOTP options
  */
@@ -128,29 +150,24 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>
 
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+
 #define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_MISC
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MFSL
 #define CONFIG_CMD_PING
 
+#ifdef XILINX_SYSACE_BASEADDR
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#endif
 
 /* Miscellaneous configurable options */
 #define	CFG_PROMPT	"U-Boot-mONStR> "
@@ -162,7 +179,7 @@
 
 #define	CONFIG_BOOTDELAY 	30
 #define	CONFIG_BOOTARGS		"root=romfs"
-#define	CONFIG_HOSTNAME		"ml401"
+#define	CONFIG_HOSTNAME		"xupv2p"
 #define	CONFIG_BOOTCOMMAND 	"base 0;tftp 11000000 image.img;bootm"
 #define	CONFIG_IPADDR		192.168.0.3
 #define	CONFIG_SERVERIP 	192.168.0.5
@@ -178,11 +195,13 @@
 	"echo"
 
 /* system ace */
+#ifdef XILINX_SYSACE_BASEADDR
 #define	CONFIG_SYSTEMACE
 /* #define DEBUG_SYSTEMACE */
 #define	SYSTEMACE_CONFIG_FPGA
 #define	CFG_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
 #define	CFG_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
 #define	CONFIG_DOS_PARTITION
+#endif
 
 #endif	/* __CONFIG_H */