X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fxtfpga.h;h=90310c46acf9800901990eb36393105821dfb053;hb=93f3362762f049c63517a73ebbbf6dd8c0e26244;hp=7d7d9bb98313412c9cb4f2b8ebf8c47723f466c9;hpb=541f538f4ca50082f77f7f34f05950d57804b1cc;p=oweals%2Fu-boot.git

diff --git a/include/configs/xtfpga.h b/include/configs/xtfpga.h
index 7d7d9bb983..90310c46ac 100644
--- a/include/configs/xtfpga.h
+++ b/include/configs/xtfpga.h
@@ -1,8 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2007-2013 Tensilica, Inc.
  * Copyright (C) 2014 - 2016 Cadence Design Systems Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -98,9 +97,8 @@
 #define CONFIG_SYS_MEMORY_SIZE		CONFIG_SYS_SDRAM_SIZE
 #endif
 
-#define CONFIG_SYS_MEMORY_TOP		MEMADDR(CONFIG_SYS_MEMORY_SIZE)
-#define CONFIG_SYS_TEXT_ADDR		\
-	(CONFIG_SYS_MEMORY_TOP - CONFIG_SYS_MONITOR_LEN)
+#define XTENSA_SYS_TEXT_ADDR		\
+	(MEMADDR(CONFIG_SYS_MEMORY_SIZE) - CONFIG_SYS_MONITOR_LEN)
 
 /* Used by tftpboot; env var 'loadaddr' */
 #define CONFIG_SYS_LOAD_ADDR		MEMADDR(0x02000000)
@@ -110,41 +108,20 @@
 /*==============================*/
 
 #define CONFIG_BOARD_POSTCLK_INIT
-#define CONFIG_MISC_INIT_R
 
 #define CONFIG_BOOTFILE			"uImage"
 	/* Console I/O Buffer Size  */
 #define CONFIG_SYS_CBSIZE		1024
-	/* Prt buf */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					 sizeof(CONFIG_SYS_PROMPT) + 16)
-	/* max number of command args */
-#define CONFIG_SYS_MAXARGS		16
 	/* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
-/*=================*/
-/* U-Boot commands */
-/*=================*/
-
-#define CONFIG_CMD_SAVES
-
 /*==============================*/
 /* U-Boot autoboot configuration */
 /*==============================*/
 
-#define CONFIG_BOOT_RETRY_TIME		60	/* retry after 60 secs */
-
-#define CONFIG_AUTO_COMPLETE			/* Support tab autocompletion */
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
 #define CONFIG_MX_CYCLIC
 #define CONFIG_SHOW_BOOT_PROGRESS
 
-#ifdef DEBUG
-#define CONFIG_PANIC_HANG		1	/* Require manual reboot */
-#endif
-
 
 /*=========================================*/
 /* FPGA Registers (board info and control) */
@@ -203,7 +180,6 @@
 
 /* Input clk to NS16550 (in Hz; the SYS_CLK_FREQ is in kHz) */
 #define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_CLK_FREQ
-#define CONFIG_CONS_INDEX		1	/* use UART0 for console */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*======================*/
@@ -250,7 +226,6 @@
  * Put environment in top block (64kB)
  * Another option would be to put env. in 2nd param block offs 8KB, size 8KB
  */
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_OFFSET    (CONFIG_SYS_FLASH_SIZE - CONFIG_SYS_FLASH_SECT_SZ)
 #define CONFIG_ENV_SIZE	     CONFIG_SYS_FLASH_SECT_SZ