X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fxpedite550x.h;h=d98062f4915d985504654ff9bd2b0a200bda125a;hb=93f3362762f049c63517a73ebbbf6dd8c0e26244;hp=76e3db1706e34996f3d3a2e1c6bdc5eff9e2c364;hpb=068789773d0b369a6a64120776932f912d183f61;p=oweals%2Fu-boot.git

diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h
index 76e3db1706..d98062f491 100644
--- a/include/configs/xpedite550x.h
+++ b/include/configs/xpedite550x.h
@@ -1,8 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2010 Extreme Engineering Solutions, Inc.
  * Copyright 2007-2008 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -14,15 +13,9 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_XPEDITE550X	1
 #define CONFIG_SYS_BOARD_NAME	"XPedite5500"
 #define CONFIG_SYS_FORM_PMC_XMC	1
 #define CONFIG_PRPMC_PCI_ALIAS	"pci0"	/* Processor PMC interface on pci0 */
-#define CONFIG_BOARD_EARLY_INIT_R	/* Call board_pre_init */
-
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE	0xfff80000
-#endif
 
 #define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup */
 #define CONFIG_PCIE1		1	/* PCIE controller 1 (PEX8112 or XMC) */
@@ -34,7 +27,6 @@
 /*
  * Multicore config
  */
-#define CONFIG_MP
 #define CONFIG_BPTR_VIRT_ADDR	0xee000000	/* virt boot page address */
 #define CONFIG_MPC8xxx_DISABLE_BPTR		/* Don't leave BPTR enabled */
 
@@ -75,7 +67,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /*
  * Diagnostics
  */
-#define CONFIG_SYS_ALT_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	0x10000000
 #define CONFIG_SYS_MEMTEST_END		0x20000000
 #define CONFIG_POST			(CONFIG_SYS_POST_MEMORY | \
@@ -193,7 +184,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /*
  * Serial Port
  */
-#define CONFIG_CONS_INDEX		1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
@@ -201,11 +191,9 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-#define CONFIG_BAUDRATE			115200
 #define CONFIG_LOADS_ECHO		1	/* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
-#define CONFIG_FDT_FIXUP_PCI_IRQ	1
 
 /*
  * I2C
@@ -220,8 +208,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 
 /* I2C DS7505 temperature sensor */
-#define CONFIG_DTT_LM75
-#define CONFIG_DTT_SENSORS		{ 0 }
 #define CONFIG_SYS_I2C_LM75_ADDR	0x48
 
 /* I2C ADT7461 temperature sensor */
@@ -292,10 +278,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /*
  * Networking options
  */
-#define CONFIG_TSEC_ENET		/* tsec ethernet support */
-#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
 #define CONFIG_TSEC_TBI
-#define CONFIG_MII		1	/* MII PHY management */
 #define CONFIG_MII_DEFAULT_TSEC	1	/* Allow unregistered phys */
 #define CONFIG_ETHPRIME		"eTSEC2"
 
@@ -333,38 +316,14 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /*
  * USB
  */
-#define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_DOS_PARTITION
-
-/*
- * Command configuration.
- */
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DTT
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_PCA953X
-#define CONFIG_CMD_PCA953X_INFO
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PCI_ENUM
-#define CONFIG_CMD_REGINFO
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_CMDLINE_EDITING	1		/* add command line history	*/
-#define CONFIG_AUTO_COMPLETE	1		/* add autocompletion support */
 #define CONFIG_LOADADDR		0x1000000	/* default location for tftp and bootm */
-#define CONFIG_PANIC_HANG			/* do not reset board on panic */
 #define CONFIG_PREBOOT				/* enable preboot variable */
 #define CONFIG_INTEGRITY			/* support booting INTEGRITY OS */
 
@@ -379,7 +338,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /*
  * Environment Configuration
  */
-#define CONFIG_ENV_IS_IN_FLASH	1
 #define CONFIG_ENV_SECT_SIZE	0x20000		/* 128k (one sector) for env */
 #define CONFIG_ENV_SIZE		0x8000
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - (256 * 1024))