X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fxilinx_zynqmp.h;h=8a78dcc59b497b92e10f7d21791c7f3dfd31b052;hb=1646eba85c9755552d246099a82329e4caba32ee;hp=b2fa164f6522b578e7932f241d1f0b98a6354797;hpb=826d06dbdd0e29ab0d8bd76d1ca640e2dfdb076c;p=oweals%2Fu-boot.git

diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index b2fa164f65..8a78dcc59b 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -34,14 +34,11 @@
 /* Have release address at the end of 256MB for now */
 #define CPU_RELEASE_ADDR	0xFFFFFF0
 
-/* Cache Definitions */
-#define CONFIG_SYS_CACHELINE_SIZE	64
-
 #if !defined(CONFIG_IDENT_STRING)
 # define CONFIG_IDENT_STRING		" Xilinx ZynqMP"
 #endif
 
-#define CONFIG_SYS_INIT_SP_ADDR		0xfffffffc
+#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE
 
 /* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
 #if !defined(COUNTER_FREQUENCY)
@@ -76,11 +73,9 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 #define CONFIG_BOOTP_MAY_FAIL
-#define CONFIG_BOOTP_SERVERIP
 #define CONFIG_BOOTP_DNS
 #define CONFIG_BOOTP_PXE
 #define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_PXE_CLIENTARCH     0x100
 
 /* Diff from config_distro_defaults.h */
 #define CONFIG_SUPPORT_RAW_INITRD
@@ -106,7 +101,6 @@
 #endif
 
 #ifdef CONFIG_NAND_ARASAN
-# define CONFIG_CMD_NAND
 # define CONFIG_CMD_NAND_LOCK_UNLOCK
 # define CONFIG_SYS_MAX_NAND_DEVICE	1
 # define CONFIG_SYS_NAND_SELF_INIT
@@ -118,11 +112,8 @@
 #define CONFIG_SYS_LOAD_ADDR		0x8000000
 
 #if defined(CONFIG_ZYNQMP_USB)
-#define CONFIG_USB_XHCI_DWC3
-#define CONFIG_USB_XHCI
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         1
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_XHCI_ZYNQMP
 
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	0x1800000
@@ -149,22 +140,6 @@
 # define DFU_ALT_INFO
 #endif
 
-/* Initial environment variables */
-#ifndef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"kernel_addr=0x80000\0" \
-	"fdt_addr=0x7000000\0" \
-	"fdt_high=0x10000000\0" \
-	CONFIG_KERNEL_FDT_OFST_SIZE \
-	"sdbootdev=0\0"\
-	"sdboot=mmc dev $sdbootdev && mmcinfo && load mmc $sdbootdev:$partid $fdt_addr system.dtb && " \
-		"load mmc $sdbootdev:$partid $kernel_addr Image && " \
-		"booti $kernel_addr - $fdt_addr\0" \
-	DFU_ALT_INFO
-#endif
-
-#define CONFIG_BOOTCOMMAND	"run $modeboot"
-#define CONFIG_BOOTDELAY	3
 
 #define CONFIG_BOARD_LATE_INIT
 
@@ -191,6 +166,8 @@
 # define CONFIG_PHY_NATSEMI
 # define CONFIG_PHY_TI
 # define CONFIG_PHY_GIGE
+# define CONFIG_PHY_VITESSE
+# define CONFIG_PHY_REALTEK
 # define PHY_ANEG_TIMEOUT       20000
 #endif
 
@@ -211,7 +188,8 @@
 # define CONFIG_SYS_EEPROM_SIZE			(64 * 1024)
 #endif
 
-#ifdef CONFIG_AHCI
+#ifdef CONFIG_SATA_CEVA
+#define CONFIG_AHCI
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
@@ -224,13 +202,57 @@
 
 #define CONFIG_SYS_BOOTM_LEN	(60 * 1024 * 1024)
 
-#define CONFIG_CMD_BOOTI
 #define CONFIG_CMD_UNZIP
 
 #define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_CLOCKS
 
+#define ENV_MEM_LAYOUT_SETTINGS \
+	"fdt_high=10000000\0" \
+	"initrd_high=10000000\0" \
+	"fdt_addr_r=0x40000000\0" \
+	"pxefile_addr_r=0x10000000\0" \
+	"kernel_addr_r=0x18000000\0" \
+	"scriptaddr=0x02000000\0" \
+	"ramdisk_addr_r=0x02100000\0" \
+
+#if defined(CONFIG_ZYNQ_SDHCI)
+# define BOOT_TARGET_DEVICES_MMC(func)	func(MMC, mmc, 0) func(MMC, mmc, 1)
+#else
+# define BOOT_TARGET_DEVICES_MMC(func)
+#endif
+
+#if defined(CONFIG_SATA_CEVA)
+# define BOOT_TARGET_DEVICES_SCSI(func)	func(SCSI, scsi, 0)
+#else
+# define BOOT_TARGET_DEVICES_SCSI(func)
+#endif
+
+#if defined(CONFIG_ZYNQMP_USB)
+# define BOOT_TARGET_DEVICES_USB(func)	func(USB, usb, 0) func(USB, usb, 1)
+#else
+# define BOOT_TARGET_DEVICES_USB(func)
+#endif
+
+#define BOOT_TARGET_DEVICES(func) \
+	BOOT_TARGET_DEVICES_MMC(func) \
+	BOOT_TARGET_DEVICES_USB(func) \
+	BOOT_TARGET_DEVICES_SCSI(func) \
+	func(PXE, pxe, na) \
+	func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+
+/* Initial environment variables */
+#ifndef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	ENV_MEM_LAYOUT_SETTINGS \
+	BOOTENV \
+	DFU_ALT_INFO
+#endif
+
 #define CONFIG_SPL_TEXT_BASE		0xfffc0000
+#define CONFIG_SPL_STACK		0xfffffffc
 #define CONFIG_SPL_MAX_SIZE		0x20000
 
 /* Just random location in OCM */
@@ -238,7 +260,6 @@
 #define CONFIG_SPL_BSS_MAX_SIZE		0x2000000
 
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_BOARD_INIT
@@ -262,8 +283,6 @@
 # define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0 /* unused */
 # define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	0 /* unused */
 # define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0 /* unused */
-# define CONFIG_SPL_LIBDISK_SUPPORT
-# define CONFIG_SPL_FAT_SUPPORT
 # define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 #endif