X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fusbarmory.h;h=595221698855ce38d9daf956ae9ee4af7be5355f;hb=432e39806805c46d583e75e8dd2f7b71cc6089c1;hp=8568663c036299537a4371d9020172fe1642de99;hpb=a212d6966bfcf393e82e44246d7dfb6de032e82a;p=oweals%2Fu-boot.git

diff --git a/include/configs/usbarmory.h b/include/configs/usbarmory.h
index 8568663c03..5952216988 100644
--- a/include/configs/usbarmory.h
+++ b/include/configs/usbarmory.h
@@ -11,30 +11,20 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_MX53
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
 #define CONFIG_SYS_FSL_CLK
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_MXC_GPIO
 
 #include <asm/arch/imx-regs.h>
 
 #include <config_distro_defaults.h>
 
-/* U-Boot commands */
-
 /* U-Boot environment */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_SYS_NO_FLASH
 #define CONFIG_ENV_OFFSET	(6 * 64 * 1024)
 #define CONFIG_ENV_SIZE		(8 * 1024)
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV	0
 
 /* U-Boot general configurations */
 #define CONFIG_SYS_CBSIZE	512
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 #define CONFIG_SYS_MAXARGS	16
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 
@@ -42,19 +32,14 @@
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE	UART1_BASE
 #define CONFIG_CONS_INDEX	1
-#define CONFIG_BAUDRATE		115200
 
 /* SD/MMC */
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_ESDHC_NUM	1
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
 
 /* USB */
-#define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX5
-#define CONFIG_USB_STORAGE
 #define CONFIG_MXC_USB_PORT	1
 #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS	0
@@ -66,20 +51,21 @@
 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 
 /* Fuse */
-#define CONFIG_CMD_FUSE
 #define CONFIG_FSL_IIM
 
-/* Linux boot */
+/* U-Boot memory offsets */
 #define CONFIG_LOADADDR		0x72000000
 #define CONFIG_SYS_TEXT_BASE	0x77800000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
+
+/* Linux boot */
 #define CONFIG_HOSTNAME		usbarmory
 #define CONFIG_BOOTCOMMAND						\
 	"run distro_bootcmd; "						\
 	"setenv bootargs console=${console} ${bootargs_default}; "	\
-	"ext2load mmc 0:1 ${kernel_addr_r} /boot/uImage; "		\
+	"ext2load mmc 0:1 ${kernel_addr_r} /boot/zImage; "		\
 	"ext2load mmc 0:1 ${fdt_addr_r} /boot/${fdtfile}; "		\
-	"bootm ${kernel_addr_r} - ${fdt_addr_r}"
+	"bootz ${kernel_addr_r} - ${fdt_addr_r}"
 
 #define BOOT_TARGET_DEVICES(func) func(MMC, mmc, 0)
 
@@ -99,6 +85,11 @@
 	"console=ttymxc0,115200\0"				\
 	BOOTENV
 
+#ifndef CONFIG_CMDLINE
+#define USBARMORY_FIT_PATH	"/boot/usbarmory.itb"
+#define USBARMORY_FIT_ADDR	"0x70800000"
+#endif
+
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			CSD0_BASE_ADDR