X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Funiphier.h;h=68568f412245f102f9649cc24a2f9b9f6dab1557;hb=dcf722ece6aad0c1512a26cdefc2f74a192fa9d2;hp=21ed1d368a5a4b4ba3c451e687fa407b5d4b3d3f;hpb=8297e648b82197b7b543b0cc702983fcf98fe82c;p=oweals%2Fu-boot.git

diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index 21ed1d368a..68568f4122 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -45,22 +45,15 @@
  * MMU and Cache Setting
  *----------------------------------------------------------------------*/
 
-/* Comment out the following to enable L1 cache */
-/* #define CONFIG_SYS_ICACHE_OFF */
-/* #define CONFIG_SYS_DCACHE_OFF */
-
 #define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
 
 #define CONFIG_TIMESTAMP
 
 /* FLASH related */
 
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-
 #define CONFIG_SYS_MAX_FLASH_SECT	256
 #define CONFIG_SYS_MONITOR_BASE		0
-#define CONFIG_SYS_MONITOR_LEN		0x00090000	/* 576KB */
+#define CONFIG_SYS_MONITOR_LEN		0x000d0000	/* 832KB */
 #define CONFIG_SYS_FLASH_BASE		0
 
 /*
@@ -97,13 +90,6 @@
 #define CONFIG_SYS_NAND_DATA_BASE			0x68000000
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS			0
 
-/* SD/MMC */
-#define CONFIG_SUPPORT_EMMC_BOOT
-
-/* memtest works on */
-#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x01000000)
-
 /*
  * Network Configuration
  */
@@ -112,8 +98,7 @@
 #define CONFIG_GATEWAYIP		192.168.11.1
 #define CONFIG_NETMASK			255.255.255.0
 
-#define CONFIG_LOADADDR			0x85000000
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+#define CONFIG_SYS_LOAD_ADDR		0x85000000
 #define CONFIG_SYS_BOOTM_LEN		(32 << 20)
 
 #if defined(CONFIG_ARM64)
@@ -136,8 +121,8 @@
 
 #ifdef CONFIG_FIT
 #define CONFIG_BOOTFILE			"fitImage"
+#define KERNEL_ADDR_R_OFFSET		"0x05100000"
 #define LINUXBOOT_ENV_SETTINGS \
-	"kernel_addr_r=0x85100000\0" \
 	"tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
 		"bootm $kernel_addr_r\0" \
 	"__nfsboot=run tftpboot\0"
@@ -145,17 +130,13 @@
 #ifdef CONFIG_ARM64
 #define CONFIG_BOOTFILE			"Image"
 #define LINUXBOOT_CMD			"booti"
-#define KERNEL_ADDR_R			"kernel_addr_r=0x82080000\0"
+#define KERNEL_ADDR_R_OFFSET		"0x02080000"
 #else
 #define CONFIG_BOOTFILE			"zImage"
 #define LINUXBOOT_CMD			"bootz"
-#define KERNEL_ADDR_R			"kernel_addr_r=0x80208000\0"
+#define KERNEL_ADDR_R_OFFSET		"0x00208000"
 #endif
 #define LINUXBOOT_ENV_SETTINGS \
-	"fdt_addr_r=0x85100000\0" \
-	KERNEL_ADDR_R \
-	"ramdisk_addr_r=0x86000000\0" \
-	"ramdisk_file=rootfs.cpio.gz\0" \
 	"boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 && " \
 		LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
 	"tftpboot=tftpboot $kernel_addr_r $bootfile && " \
@@ -170,10 +151,39 @@
 #endif
 
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
+	"fdt_addr_r_offset=0x05100000\0" \
+	"kernel_addr_r_offset=" KERNEL_ADDR_R_OFFSET "\0" \
+	"ramdisk_addr_r_offset=0x06000000\0" \
+	"ramdisk_file=rootfs.cpio.gz\0" \
 	"netdev=eth0\0"						\
 	"initrd_high=0xffffffffffffffff\0"			\
+	"loadaddr_offset=0x05000000\0" \
+	"script=boot.scr\0" \
 	"scriptaddr=0x85000000\0"				\
 	"nor_base=0x42000000\0"					\
+	"emmcboot=mmcsetn && run bootcmd_mmc${mmc_first_dev}\0" \
+	"nandboot=run bootcmd_ubifs0\0" \
+	"norboot=run tftpboot\0" \
+	"usbboot=run bootcmd_usb0\0" \
+	"emmcscript=setenv devtype mmc && " \
+		"mmcsetn && " \
+		"setenv devnum ${mmc_first_dev} && " \
+		"run loadscript_fat\0" \
+	"nandscript=echo Running ${script} from ubi ... && " \
+		"ubi part UBI && " \
+		"ubifsmount ubi0:boot && " \
+		"ubifsload ${loadaddr} ${script} && " \
+		"source\0" \
+	"norscript=echo Running ${script} from tftp ... && " \
+		"tftpboot ${script} &&" \
+		"source\0" \
+	"usbscript=usb start && " \
+		"setenv devtype usb && " \
+		"setenv devnum 0 && " \
+		"run loadscript_fat\0" \
+	"loadscript_fat=echo Running ${script} from ${devtype}${devnum} ... && " \
+		"load ${devtype} ${devnum}:1 ${loadaddr} ${script} && " \
+		"source\0" \
 	"sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&"	\
 		"tftpboot $tmp_addr $second_image && " \
 		"setexpr tmp_addr $nor_base + 0x70000 && " \
@@ -201,24 +211,15 @@
 
 #define CONFIG_SYS_BOOTMAPSZ			0x20000000
 
-#define CONFIG_SYS_SDRAM_BASE		0x80000000
-
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_TEXT_BASE)
 
 /* only for SPL */
-#if defined(CONFIG_ARCH_UNIPHIER_LD4) || \
-	defined(CONFIG_ARCH_UNIPHIER_SLD8)
-#define CONFIG_SPL_TEXT_BASE		0x00040000
-#else
-#define CONFIG_SPL_TEXT_BASE		0x00100000
-#endif
-
 #define CONFIG_SPL_STACK		(0x00200000)
 
 #define CONFIG_SYS_NAND_U_BOOT_OFFS		0x20000
 
 /* subtract sizeof(struct image_header) */
-#define CONFIG_SYS_UBOOT_BASE			(0x70000 - 0x40)
+#define CONFIG_SYS_UBOOT_BASE			(0x130000 - 0x40)
 
 #define CONFIG_SPL_TARGET			"u-boot-with-spl.bin"
 #define CONFIG_SPL_MAX_FOOTPRINT		0x10000