X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fulcb.h;h=1d99dcaba666622ba231547970f535080b57d969;hb=26822fd23cb1cf5eebe88547d879c01756228748;hp=921b9e5ec66ee68b4ae25cc20394b4c82d3d3f4a;hpb=03a38a397248529b01908eaed24f9262545ca9b5;p=oweals%2Fu-boot.git

diff --git a/include/configs/ulcb.h b/include/configs/ulcb.h
index 921b9e5ec6..1d99dcaba6 100644
--- a/include/configs/ulcb.h
+++ b/include/configs/ulcb.h
@@ -1,109 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * include/configs/ulcb.h
  *     This file is ULCB board configuration.
  *
  * Copyright (C) 2017 Renesas Electronics Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
  */
 
 #ifndef __ULCB_H
 #define __ULCB_H
 
-#undef DEBUG
-
-#define CONFIG_RCAR_BOARD_STRING "ULCB"
-
 #include "rcar-gen3-common.h"
 
-/* M3 ULCB has 2 banks, each with 1 GiB of RAM */
-#if defined(CONFIG_R8A7796)
-#undef PHYS_SDRAM_1_SIZE
-#undef PHYS_SDRAM_2_SIZE
-#define PHYS_SDRAM_1_SIZE		(0x40000000u - DRAM_RSV_SIZE)
-#define PHYS_SDRAM_2_SIZE		0x40000000u
-#endif
-
-/* SCIF */
-#define CONFIG_CONS_SCIF2
-#define CONFIG_CONS_INDEX	2
-#define CONFIG_SH_SCIF_CLK_FREQ        CONFIG_S3D4_CLK_FREQ
-
-/* [A] Hyper Flash */
-/* use to RPC(SPI Multi I/O Bus Controller) */
-
 /* Ethernet RAVB */
-#define CONFIG_NET_MULTI
-#define CONFIG_PHY_MICREL
 #define CONFIG_BITBANGMII
 #define CONFIG_BITBANGMII_MULTI
 
-/* Board Clock */
-/* XTAL_CLK : 33.33MHz */
-#define RCAR_XTAL_CLK		33333333u
-#define CONFIG_SYS_CLK_FREQ	RCAR_XTAL_CLK
-/* ch0to2 CPclk, ch3to11 S3D2_PEREclk, ch12to14 S3D2_RTclk */
-/* CPclk 16.66MHz, S3D2 133.33MHz , S3D4 66.66MHz          */
-#define CONFIG_CP_CLK_FREQ	(CONFIG_SYS_CLK_FREQ / 2)
-#define CONFIG_PLL1_CLK_FREQ	(CONFIG_SYS_CLK_FREQ * 192 / 2)
-#define CONFIG_S3D2_CLK_FREQ	(266666666u/2)
-#define CONFIG_S3D4_CLK_FREQ	(266666666u/4)
-
 /* Generic Timer Definitions (use in assembler source) */
 #define COUNTER_FREQUENCY	0xFE502A	/* 16.66MHz from CPclk */
 
-/* Generic Interrupt Controller Definitions */
-#define CONFIG_GICV2
-#define GICD_BASE	0xF1010000
-#define GICC_BASE	0xF1020000
-
-/* CPLD SPI */
-#define CONFIG_CMD_SPI
-#define CONFIG_SOFT_SPI
-#define SPI_DELAY	udelay(0)
-#define SPI_SDA(val)	ulcb_softspi_sda(val)
-#define SPI_SCL(val)	ulcb_softspi_scl(val)
-#define SPI_READ	ulcb_softspi_read()
-#ifndef	__ASSEMBLY__
-void ulcb_softspi_sda(int);
-void ulcb_softspi_scl(int);
-unsigned char ulcb_softspi_read(void);
-#endif
-
-/* i2c */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SH
-#define CONFIG_SYS_I2C_SLAVE		0x60
-#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS	1
-#define CONFIG_SYS_I2C_SH_SPEED0	400000
-#define CONFIG_SH_I2C_DATA_HIGH		4
-#define CONFIG_SH_I2C_DATA_LOW		5
-#define CONFIG_SH_I2C_CLOCK		10000000
-
-#define CONFIG_SYS_I2C_POWERIC_ADDR	0x30
-
-/* USB */
-#ifdef CONFIG_R8A7795
-#define CONFIG_USB_MAX_CONTROLLER_COUNT	3
-#else
-#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
-#endif
-
-/* SDHI */
-#define CONFIG_SH_SDHI_FREQ		200000000
-
 /* Environment in eMMC, at the end of 2nd "boot sector" */
-#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE)
 #define CONFIG_SYS_MMC_ENV_DEV		1
 #define CONFIG_SYS_MMC_ENV_PART		2
 
-/* Module stop status bits */
-/* MFIS, SCIF1 */
-#define CONFIG_SMSTP2_ENA	0x00002040
-/* SCIF2 */
-#define CONFIG_SMSTP3_ENA	0x00000400
-/* INTC-AP, IRQC */
-#define CONFIG_SMSTP4_ENA	0x00000180
-
 #endif /* __ULCB_H */