X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fuc101.h;h=a18618893cd132de4df0bc96338389d20a2027df;hb=bb1f8b4f8bb0bfce52e0faa4637b975b745824b3;hp=64461f6a90ebd87bbbb9ba452fa664d9c6257035;hpb=6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7;p=oweals%2Fu-boot.git

diff --git a/include/configs/uc101.h b/include/configs/uc101.h
index 64461f6a90..a18618893c 100644
--- a/include/configs/uc101.h
+++ b/include/configs/uc101.h
@@ -40,6 +40,8 @@
 
 #define CONFIG_BOARD_EARLY_INIT_R
 
+#define CONFIG_HIGH_BATS	1	/* High BATs supported 			*/
+
 /*
  * Serial console configuration
  */
@@ -51,6 +53,15 @@
 #define CONFIG_DOS_PARTITION
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */
@@ -82,7 +93,7 @@
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
 
 #define CONFIG_PREBOOT	"echo;" \
-	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 	"echo"
 
 #undef	CONFIG_BOOTARGS
@@ -157,7 +168,7 @@
 #define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
 #define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
 
-#define CFG_FLASH_CFI_DRIVER
+#define CONFIG_FLASH_CFI_DRIVER
 #define CFG_FLASH_CFI
 #define CFG_FLASH_EMPTY_INFO
 #define CFG_FLASH_CFI_AMD_RESET
@@ -265,8 +276,7 @@
 #endif
 
 /*
- * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
- * which is normally part of the default commands (CFV_CMD_DFL)
+ * Enable loopw command.
  */
 #define CONFIG_LOOPW
 
@@ -289,7 +299,7 @@
 
 /* 8Mbit SRAM @0x80100000 */
 #define CFG_CS1_START		CFG_SRAM_BASE
-#define CFG_CS1_SIZE		0x00100000
+#define CFG_CS1_SIZE		0x00200000
 #define CFG_CS1_CFG		0x21D00
 
 /* Display H1, Status Inputs, EPLD @0x80600000 8 Bit */
@@ -324,7 +334,6 @@
 #define CFG_IDE_MAXDEVICE	2	/* max. 2 drives per IDE bus	*/
 
 #define CONFIG_IDE_PREINIT	1
-/* #define CONFIG_IDE_RESET	1 beispile siehe tqm5200.c */
 
 #define CFG_ATA_IDE0_OFFSET	0x0000