X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Ftt01.h;h=2623dbcbf8653a88965e92b35e4a79f7f2888437;hb=a939ea3ab459d5fb3d1eaaec289c6ca85f2f74c1;hp=6ef25cd6477755a94cf63dd3fe25c30ced5530c4;hpb=4d86dd022e771d7bb5f3a8ba9a8cb6954678bd7f;p=oweals%2Fu-boot.git

diff --git a/include/configs/tt01.h b/include/configs/tt01.h
index 6ef25cd647..2623dbcbf8 100644
--- a/include/configs/tt01.h
+++ b/include/configs/tt01.h
@@ -131,7 +131,7 @@
 
 #define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_SECT_SIZE	(128 * 1024)
-#define CONFIG_ENV_SIZE		(8 * 1024) /* smaller for faster access */
+#define CONFIG_ENV_SIZE		(128 * 1024)
 
 /* Address and size of Redundant Environment Sector	*/
 #define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
@@ -148,7 +148,7 @@
  * make sure that the transceiver is enabled during PL=1 for testing!
  */
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX31_UART2
+#define CONFIG_MXC_UART_BASE	UART2_BASE
 
 #define CONFIG_MXC_SPI
 #define CONFIG_MXC_GPIO
@@ -180,6 +180,33 @@
 #define CONFIG_SMC911X_BASE		(CS4_BASE+0x200000)
 #define CONFIG_SMC911X_16_BIT
 
+/* mmc driver */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MXC_MMC
+#define CONFIG_MXC_MCI_REGS_BASE       SDHC1_BASE_ADDR
+
+/* video support */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_MX3
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_LOGO
+/* splash image won't work with NAND boot, use preboot script */
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_CONSOLE_EXTRA_INFO /* display additional board info */
+#define CONFIG_VGA_AS_SINGLE_DEVICE /* display is an output only device */
+
+/* allow stdin, stdout and stderr variables to redirect output */
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SILENT_CONSOLE		/* UARTs used externally (release) */
+#define CONFIG_SYS_DEVICE_NULLDEV	/* allow console to be turned off */
+#define CONFIG_PREBOOT
+
+/* allow decompressing max. 4MB */
+#define CONFIG_VIDEO_BMP_GZIP
+/* this is not only used by cfb_console.c for the logo, but also in cmd_bmp.c */
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (4*1024*1024)
+
 /*
  * Command definition
  */
@@ -196,6 +223,7 @@
  * the NAND_CMD_LOCK_STATUS command, however the NFC of i.MX31 supports
  * a software locking scheme.
  */
+#define CONFIG_CMD_BMP
 
 #define CONFIG_BOOTDELAY	3
 
@@ -203,16 +231,25 @@
  * currently a default setting for booting via script is implemented
  *   set user to login name and serverip to tftp host, define your
  *   boot behaviour in bootscript.loginname
+ *
+ * TT-01 board specific TFT setup (used by drivers/video/mx3fb.c)
+ *
+ *  This set-up is for the L5F30947T04 by Epson, which is
+ *   800x480, 33MHz pixel clock, 60Hz vsync, 31.6kHz hsync
+ *  sync must be set to: DI_D3_DRDY_SHARP_POL | DI_D3_CLK_POL
  */
 #define	CONFIG_EXTRA_ENV_SETTINGS \
-	"bootcmd=dhcp bootscript.$(user); source\0"
+"videomode=epson\0" \
+"epson=video=ctfb:x:800,y:480,depth:16,mode:0,pclk:30076," \
+	"le:215,ri:1,up:32,lo:13,hs:7,vs:10,sync:100663296,vmode:0\0" \
+"bootcmd=dhcp bootscript.${user}; source\0"
 
 #define CONFIG_BOOTP_SERVERIP /* tftp serverip not overruled by dhcp server */
 #define CONFIG_BOOTP_SEND_HOSTNAME /* if env-var 'hostname' is set, send it */
 
 /* Miscellaneous configurable options */
-#define CONFIG_HUSH_PARSER
-#define CONFIG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 #define CONFIG_SYS_LONGHELP			/* undef to save memory */
 #define CONFIG_SYS_PROMPT	"TT01> "
@@ -229,9 +266,15 @@
 
 #define CONFIG_CMDLINE_EDITING
 
+/* MMC boot support */
+#define CONFIG_CMD_MMC
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+
 #define CONFIG_NAND_MXC
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
-#define CONFIG_SYS_NAND_MAX_CHIPS		1
 
 /*
  * actually this is nothing someone wants to configure!