X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Ftricorder.h;h=f5f53249e28a63b698de838fbd1648274b4b13d4;hb=9368aa6a680f150755a233be9f97956bba5a915e;hp=cc0d172115f9e8be45b8e5205a4ac7a81230019d;hpb=dcdb61a084bd3840d0987a5d01ae506c11efca1b;p=oweals%2Fu-boot.git

diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index cc0d172115..f5f53249e2 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -17,9 +17,13 @@
 #define __CONFIG_H
 
 /* High Level Configuration Options */
+#define CONFIG_SYS_THUMB_BUILD
 #define CONFIG_OMAP			/* in a TI OMAP core */
-#define CONFIG_OMAP34XX			/* which is a 34XX */
 #define CONFIG_OMAP_COMMON
+/* Common ARM Erratas */
+#define CONFIG_ARM_ERRATA_454179
+#define CONFIG_ARM_ERRATA_430973
+#define CONFIG_ARM_ERRATA_621766
 
 #define CONFIG_MACH_TYPE		MACH_TYPE_TRICORDER
 /*
@@ -33,9 +37,8 @@
 #define CONFIG_SDRC			/* The chip has SDRC controller */
 
 #include <asm/arch/cpu.h>		/* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
 
-#define CONFIG_SYS_GENERIC_BOARD
 
 /* Display CPU and Board information */
 #define CONFIG_DISPLAY_CPUINFO
@@ -83,7 +86,6 @@
 #define STATUS_LED_PERIOD2		(CONFIG_SYS_HZ / 2)
 
 /* NS16550 Configuration */
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
 #define CONFIG_SYS_NS16550_CLK		48000000 /* 48MHz (APLL96/2) */
@@ -110,7 +112,6 @@
  
 
 /* EEPROM */
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_CMD_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
 #define CONFIG_SYS_EEPROM_BUS_NUM	1
@@ -146,8 +147,6 @@
 #define CONFIG_SYS_NAND_MAX_ECCPOS	56
 
 /* commands to include */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_EXT2			/* EXT2 Support */
 #define CONFIG_CMD_FAT			/* FAT support */
 #define CONFIG_CMD_I2C			/* I2C serial bus support */
@@ -159,10 +158,6 @@
 #define CONFIG_CMD_UBIFS		/* UBIFS commands */
 #define CONFIG_LZO			/* LZO is needed for UBIFS */
 
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_FPGA			/* FPGA configuration Support */
-#undef CONFIG_CMD_IMI			/* iminfo */
 #undef CONFIG_CMD_JFFS2			/* JFFS2 Support */
 
 /* needed for ubi */
@@ -287,7 +282,6 @@
 #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
 #define CONFIG_CMDLINE_EDITING		/* enable cmdline history */
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_PROMPT		"OMAP3 Tricorder # "
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
@@ -349,13 +343,12 @@
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME        "u-boot.img"
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION    1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
 
 #define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/
 #define CONFIG_SPL_MAX_SIZE		(57 * 1024)	/* 7 KB for stack */
-#define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
 
 #define CONFIG_SPL_BSS_START_ADDR	0x80000000 /*CONFIG_SYS_SDRAM_BASE*/
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000