X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Ftricorder.h;h=63c98dc723112c94046632e17ecb02ca7309d368;hb=91dd7ca6ac9b9b760a1671ec845d4401a13df11e;hp=ba8847b40211910bdb836a0743988ab67febd7b4;hpb=512dce098fd9b5b252e1f4817cd2cdb11af9bdf0;p=oweals%2Fu-boot.git

diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index ba8847b402..63c98dc723 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -58,7 +58,6 @@
 #define V_OSCK				26000000 /* Clock output from T2 */
 #define V_SCLK				(V_OSCK >> 1)
 
-#undef CONFIG_USE_IRQ			/* no support for IRQs */
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
@@ -71,7 +70,7 @@
 /* Size of malloc() pool */
 #define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
 						/* Sector */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (512 << 10))
+#define CONFIG_SYS_MALLOC_LEN		(1024*1024)
 
 /* Hardware drivers */
 
@@ -139,7 +138,9 @@
 #define CONFIG_CMD_MTDPARTS		/* Enable MTD parts commands */
 #define CONFIG_CMD_NAND			/* NAND support */
 #define CONFIG_CMD_NAND_LOCK_UNLOCK	/* nand (un)lock commands */
-#define CONFIG_CMD_UBI			/* UBIFS commands */
+#define CONFIG_CMD_UBI			/* UBI commands */
+#define CONFIG_CMD_UBIFS		/* UBIFS commands */
+#define CONFIG_LZO			/* LZO is needed for UBIFS */
 
 #undef CONFIG_CMD_NET
 #undef CONFIG_CMD_NFS
@@ -180,7 +181,8 @@
 		"setenv bootargs ${bootargs} " \
 		"omapfb.mode=lcd:${lcdmode} " \
 		"omapdss.def_disp=${defaultdisplay} " \
-		"root=ubi0:rootfs " \
+		"root=ubi0:root " \
+		"ubi.mtd=4 " \
 		"rootfstype=ubifs " \
 		"${kernelopts}\0" \
 	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
@@ -191,9 +193,13 @@
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"bootm ${loadaddr}\0" \
+	"loaduimage_ubi=mtd default; " \
+		"ubi part fs; " \
+		"ubifsmount root; " \
+		"ubifsload ${loadaddr} /boot/uImage\0" \
 	"nandboot=echo Booting from nand ...; " \
 		"run nandargs; " \
-		"nand read ${loadaddr} 280000 400000; " \
+		"run loaduimage_ubi; " \
 		"bootm ${loadaddr}\0" \
 	"autoboot=if mmc rescan ${mmcdev}; then " \
 			"if run loadbootscript; then " \
@@ -213,7 +219,6 @@
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_SYS_PROMPT		"OMAP3 Tricorder # "
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
 /* Print Buffer Size */
@@ -239,9 +244,6 @@
 #define CONFIG_SYS_PTV			2 /* Divisor: 2^(PTV+1) => 8 */
 #define CONFIG_SYS_HZ			1000
 
-/* The stack sizes are set up in start.S using the settings below */
-#define CONFIG_STACKSIZE		(128 << 10) /* regular stack 128 KiB */
-
 /*  Physical Memory Map  */
 #define CONFIG_NR_DRAM_BANKS		2 /* CS1 may or may not be populated */
 #define PHYS_SDRAM_1			OMAP34XX_SDRC_CS0
@@ -271,6 +273,7 @@
 #define CONFIG_SPL
 #define CONFIG_SPL_NAND_SIMPLE
 
+#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBDISK_SUPPORT
 #define CONFIG_SPL_I2C_SUPPORT
@@ -286,7 +289,7 @@
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
 
 #define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/
-#define CONFIG_SPL_MAX_SIZE		0xB400  /* 45 K */
+#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
 #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
 
 #define CONFIG_SPL_BSS_START_ADDR	0x80000000 /*CONFIG_SYS_SDRAM_BASE*/