X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Ftqma6.h;h=1fd3f2ac9d570acfa00f875a5437336478d816a3;hb=39fbac91e1987b6c4d7699d2adef41cb65bb7c96;hp=bb63caa2637503998e76f78cdd320f8b9734cd5e;hpb=302b2e5babb11b24c7808b79521851457fb2d8e8;p=oweals%2Fu-boot.git

diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index bb63caa263..1fd3f2ac9d 100644
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -9,6 +9,7 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/kconfig.h>
 /* SPL */
 /* #if defined(CONFIG_SPL_BUILD) */
 
@@ -22,6 +23,13 @@
 
 /* #endif */
 
+/* place code in last 4 MiB of RAM */
+#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
+#define CONFIG_SYS_TEXT_BASE		0x2fc00000
+#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
+#define CONFIG_SYS_TEXT_BASE		0x4fc00000
+#endif
+
 #include "mx6_common.h"
 
 #if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
@@ -40,8 +48,6 @@
 #define CONFIG_MXC_SPI
 
 /* SPI Flash */
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
 
 #define TQMA6_SPI_FLASH_SECTOR_SIZE	SZ_64K
 
@@ -55,6 +61,8 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_I2C_SPEED		100000
@@ -80,15 +88,8 @@
 #define TQMA6_PFUZE100_I2C_BUS		2
 
 /* MMC Configs */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_BOUNCE_BUFFER
-
 /* USB Configs */
 #define CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
@@ -100,21 +101,9 @@
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
 
-/* Fuses */
-#define CONFIG_MXC_OCOTP
-#define CONFIG_CMD_FUSE
-
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_EXT4_WRITE
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_DOS_PARTITION
-
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 
 #define CONFIG_FEC_MXC
 #define IMX_FEC_BASE			ENET_BASE_ADDR
@@ -127,27 +116,8 @@
 #define CONFIG_TFTP_BLOCKSIZE	4096
 #define CONFIG_NFS_READ_SIZE	4096
 
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX		1
-#define CONFIG_BAUDRATE			115200
-
 /* Command definition */
 #define CONFIG_CMD_BMODE
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_ITEST
-#define CONFIG_CMD_SETEXPR
-
-#define CONFIG_BOOTDELAY		3
-
-#define CONFIG_LOADADDR			0x12000000
-
-/* place code in last 4 MiB of RAM */
-#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
-#define CONFIG_SYS_TEXT_BASE		0x2fc00000
-#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
-#define CONFIG_SYS_TEXT_BASE		0x4fc00000
-#endif
 
 #define CONFIG_ENV_SIZE			(SZ_8K)
 /* Size of malloc() pool */
@@ -393,23 +363,6 @@
 	"panicboot=echo No boot device !!! reset\0"                            \
 	TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS                                      \
 
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
-
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE		512
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					 sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS		16
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-
-#define CONFIG_CMDLINE_EDITING
 #define CONFIG_STACKSIZE		(128u * SZ_1K)
 
 /* Physical Memory Map */
@@ -425,15 +378,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-#define CONFIG_CMD_CACHE
-#endif
-
 /*
  * All the defines above are for the TQMa6 SoM
  *
@@ -441,6 +385,8 @@
  */
 #ifdef CONFIG_MBA6
 #include "tqma6_mba6.h"
+#elif CONFIG_WRU4
+#include "tqma6_wru4.h"
 #else
 #error "No baseboard for the TQMa6 defined!"
 #endif