X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Ftqma6.h;h=13e3d60bfe7bb0cab7f7f1a032245e5044c8dcee;hb=79b8d3c285f4f1c2ee4b27367f2ca3ecb76ed9ce;hp=738693c0c008565b4df4ed088d141a26ceb1fe80;hpb=a9f47426ced2e5057930990f3cd602b8ab936f69;p=oweals%2Fu-boot.git

diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index 738693c0c0..13e3d60bfe 100644
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2013, 2014, 2017 Markus Niebel <Markus.Niebel@tq-group.com>
  *
  * Configuration settings for the TQ Systems TQMa6<Q,D,DL,S> module.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -18,11 +17,6 @@
 /* #endif */
 
 /* place code in last 4 MiB of RAM */
-#if defined(CONFIG_TQMA6S)
-#define CONFIG_SYS_TEXT_BASE		0x2fc00000
-#elif defined(CONFIG_TQMA6Q) || defined(CONFIG_TQMA6DL)
-#define CONFIG_SYS_TEXT_BASE		0x4fc00000
-#endif
 
 #include "mx6_common.h"
 
@@ -36,18 +30,10 @@
 
 #define CONFIG_MXC_UART
 
-/* SPI */
-#define CONFIG_MXC_SPI
-
 /* SPI Flash */
 
 #define TQMA6_SPI_FLASH_SECTOR_SIZE	SZ_64K
 
-#define CONFIG_SF_DEFAULT_BUS	0
-#define CONFIG_SF_DEFAULT_CS	0
-#define CONFIG_SF_DEFAULT_SPEED	50000000
-#define CONFIG_SF_DEFAULT_MODE	(SPI_MODE_0)
-
 /* I2C Configs */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
@@ -57,19 +43,11 @@
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_I2C_SPEED		100000
 
-/* I2C SYSMON (LM75) */
-#define CONFIG_DTT_LM75
-#define CONFIG_DTT_MAX_TEMP		70
-#define CONFIG_DTT_MIN_TEMP		-30
-#define CONFIG_DTT_HYSTERESIS	3
-#define CONFIG_CMD_DTT
-
 /* I2C EEPROM (M24C64) */
 #define CONFIG_SYS_I2C_EEPROM_ADDR			0x50
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN			2
 #define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_BITS		5 /* 32 Bytes */
 #define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_DELAY_MS	20
-#define CONFIG_CMD_EEPROM
 
 #define CONFIG_POWER
 #define CONFIG_POWER_I2C
@@ -81,16 +59,12 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 
 /* USB Configs */
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_SMSC95XX
 #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
 
 #define CONFIG_FEC_MXC
 #define IMX_FEC_BASE			ENET_BASE_ADDR
-#define CONFIG_PHYLIB
-#define CONFIG_MII
 
 #define CONFIG_ARP_TIMEOUT		200UL
 
@@ -100,7 +74,6 @@
 
 #if defined(CONFIG_TQMA6X_MMC_BOOT)
 
-#define CONFIG_ENV_IS_IN_MMC
 #define TQMA6_UBOOT_OFFSET		SZ_1K
 #define TQMA6_UBOOT_SECTOR_START	0x2
 #define TQMA6_UBOOT_SECTOR_COUNT	0x7fe
@@ -175,18 +148,12 @@
 #define TQMA6_UBOOT_SIZE		(TQMA6_UBOOT_SECTOR_SIZE * \
 					 TQMA6_UBOOT_SECTOR_COUNT)
 
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 #define CONFIG_ENV_OFFSET		(TQMA6_UBOOT_SIZE)
 #define CONFIG_ENV_SECT_SIZE		TQMA6_SPI_FLASH_SECTOR_SIZE
 #define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + \
 					 CONFIG_ENV_SECT_SIZE)
 
-#define CONFIG_ENV_SPI_BUS		(CONFIG_SF_DEFAULT_BUS)
-#define CONFIG_ENV_SPI_CS		(CONFIG_SF_DEFAULT_CS)
-#define CONFIG_ENV_SPI_MAX_HZ		(CONFIG_SF_DEFAULT_SPEED)
-#define CONFIG_ENV_SPI_MODE		(CONFIG_SF_DEFAULT_MODE)
-
 #define TQMA6_FDT_OFFSET		(CONFIG_ENV_OFFSET_REDUND + \
 					 CONFIG_ENV_SECT_SIZE)
 #define TQMA6_FDT_SECT_SIZE		(TQMA6_SPI_FLASH_SECTOR_SIZE)
@@ -345,7 +312,6 @@
 	TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS                                      \
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
@@ -371,8 +337,5 @@
 #endif
 
 /* Support at least the sensor on TQMa6 SOM */
-#if !defined(CONFIG_DTT_SENSORS)
-#define CONFIG_DTT_SENSORS		{ 0 }
-#endif
 
 #endif /* __CONFIG_H */