X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Ftao3530.h;h=97fe79607d510d91bc3cb69bd0fc69065b3e3a2b;hb=28824407f341fa424535e18e164ea94b5e2cfa8a;hp=174bfe50a9d98fa954ee38dc478f5066661c3bab;hpb=e82abaeb7f2a0833fccf90460c48b9f2100258f8;p=oweals%2Fu-boot.git

diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index 174bfe50a9..97fe79607d 100644
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -16,20 +16,21 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_ARMV7			/* This is an ARM V7 CPU core */
 #define CONFIG_OMAP			/* in a TI OMAP core */
-#define CONFIG_OMAP34XX			/* which is a 34XX */
 
 #define CONFIG_OMAP_GPIO
 #define CONFIG_OMAP_COMMON
-#define CONFIG_SYS_GENERIC_BOARD
+/* Common ARM Erratas */
+#define CONFIG_ARM_ERRATA_454179
+#define CONFIG_ARM_ERRATA_430973
+#define CONFIG_ARM_ERRATA_621766
 
 #define MACH_TYPE_OMAP3_TAO3530		2836
 
 #define CONFIG_SDRC			/* Has an SDRC controller */
 
 #include <asm/arch/cpu.h>		/* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
 
 /*
  * Display CPU and Board information
@@ -92,8 +93,6 @@
 #define CONFIG_OMAP3_GPIO_6		/* GPIO160..191 is in GPIO bank 6 */
 
 /* commands to include */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_EXT2		/* EXT2 Support			*/
 #define CONFIG_CMD_FAT		/* FAT support			*/
@@ -110,11 +109,6 @@
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_PING
 
-#undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
-#undef CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
-#undef CONFIG_CMD_IMI		/* iminfo			*/
-#undef CONFIG_CMD_IMLS		/* List all found images	*/
-
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_OMAP34XX
@@ -131,7 +125,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_SYS_NAND_QUIET_TEST
 #define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
 							/* to access nand */
@@ -141,7 +134,7 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
 							/* devices */
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT	16
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 /* Environment information */
 #define CONFIG_BOOTDELAY		3
 
@@ -201,7 +194,6 @@
  */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
-#define CONFIG_SYS_PROMPT		"TAO-3530 # "
 #define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
 
 /* turn on command-line edit/hist/auto */
@@ -306,8 +298,8 @@
 
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
@@ -348,7 +340,6 @@
 
 #define CONFIG_SPL_TEXT_BASE		0x40200800
 #define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
-#define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
 
 /*
  * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the