X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fspieval.h;h=ab1c6f4e75eb54729c4a2e90a841c37d09d4448e;hb=35dd025c70fcc4389317db2f2a9d14795172137d;hp=ccfcf1c8dc080fe6a2e2658bce8bd8dc2ca1eef3;hpb=af075ee96e52dda7b6bca6c937588aeaaec5f2cd;p=oweals%2Fu-boot.git

diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index ccfcf1c8dc..ab1c6f4e75 100644
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -44,6 +44,8 @@
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
 
+#define CONFIG_HIGH_BATS	1	/* High BATs supported */
+
 /*
  * Serial console configuration
  */
@@ -121,6 +123,15 @@
 #endif
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */
@@ -155,6 +166,7 @@
 
 #ifdef CONFIG_PCI
     #define CONFIG_CMD_PCI
+    #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE	1
 #endif
 
 #ifdef CONFIG_POST
@@ -174,7 +186,7 @@
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
 
 #define CONFIG_PREBOOT	"echo;" \
-	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 	"echo"
 
 #undef	CONFIG_BOOTARGS
@@ -275,7 +287,7 @@
 
 /* use CFI flash driver if no module variant is spezified */
 #define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
-#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
 #define CFG_FLASH_BANKS_LIST	{ CFG_BOOTCS_START }
 #define CFG_FLASH_EMPTY_INFO
 #define CFG_FLASH_SIZE		0x04000000 /* 64 MByte */
@@ -283,9 +295,9 @@
 #undef CFG_FLASH_USE_BUFFER_WRITE	/* not supported yet for AMD */
 
 #if !defined(CFG_LOWBOOT)
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00760000 + 0x00800000)
+#define CONFIG_ENV_ADDR		(CFG_FLASH_BASE + 0x00760000 + 0x00800000)
 #else	/* CFG_LOWBOOT */
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00060000)
+#define CONFIG_ENV_ADDR		(CFG_FLASH_BASE + 0x00060000)
 #endif	/* CFG_LOWBOOT */
 #define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks
 					   (= chip selects) */
@@ -296,11 +308,11 @@
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE		0x10000
-#define CFG_ENV_SECT_SIZE	0x20000
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE		0x10000
+#define CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 /*
  * Memory map
@@ -419,8 +431,7 @@
 #endif
 
 /*
- * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
- * which is normally part of the default commands (CFV_CMD_DFL)
+ * Enable loopw command.
  */
 #define CONFIG_LOOPW