X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fseaboard.h;h=3e904746f29517fc5cb51402caa5a20c06d7e97c;hb=9368aa6a680f150755a233be9f97956bba5a915e;hp=889bdfff383b009baf1e36062edd11b33cf2e3bf;hpb=046c76a6c0af77952a1ec5ab576d12f93ed52641;p=oweals%2Fu-boot.git diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index 889bdfff38..3e904746f2 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -2,119 +2,84 @@ * (C) Copyright 2010,2011 * NVIDIA Corporation * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H #define __CONFIG_H -#include +#include /* LP0 suspend / resume */ -#define CONFIG_TEGRA2_LP0 +#define CONFIG_TEGRA_LP0 #define CONFIG_AES #define CONFIG_TEGRA_PMU #define CONFIG_TPS6586X_POWER #define CONFIG_TEGRA_CLOCK_SCALING -#include "tegra2-common.h" - -/* Enable fdt support for Seaboard. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra2-seaboard -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE +#include "tegra20-common.h" /* High-level configuration options */ -#define TEGRA2_SYSMEM "mem=384M@0M nvmem=128M@384M mem=512M@512M" -#define V_PROMPT "Tegra2 (SeaBoard) # " -#define CONFIG_TEGRA2_BOARD_STRING "NVIDIA Seaboard" +#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Seaboard" /* Board-specific serial config */ -#define CONFIG_SERIAL_MULTI -#define CONFIG_TEGRA2_ENABLE_UARTD +#define CONFIG_TEGRA_ENABLE_UARTD #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE -/* On Seaboard: GPIO_PI3 = Port I = 8, bit = 3 */ -#define CONFIG_UART_DISABLE_GPIO GPIO_PI3 -/* - * On Seaboard, SPIFLASH is muxed with UART4. The next 5 defines are - * needed to work around that design error. - */ -#define CONFIG_SPI_UART_SWITCH -#define CONFIG_SPI_CORRUPTS_UART NV_PA_APB_UARTD_BASE -#define CONFIG_SPI_CORRUPTS_UART_NR 3 -#define CONFIG_SPI_CORRUPTS_UART_DLY 2500 -#undef CONFIG_CMDLINE_EDITING /* avoid NUL in input buffer */ - #define CONFIG_MACH_TYPE MACH_TYPE_SEABOARD -#define CONFIG_SYS_BOARD_ODMDATA 0x300d8011 /* lp1, 1GB */ - -#define CONFIG_BOARD_EARLY_INIT_F - -/* SPI */ -#define CONFIG_TEGRA2_SPI -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_WINBOND -#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF -#define CONFIG_SPI_FLASH_SIZE (4 << 20) /* I2C */ -#define CONFIG_TEGRA_I2C -#define CONFIG_SYS_I2C_INIT_BOARD -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_SYS_MAX_I2C_BUS 4 -#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_TEGRA #define CONFIG_CMD_I2C /* SD/MMC */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_TEGRA2_MMC +#define CONFIG_TEGRA_MMC #define CONFIG_CMD_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT - -/* Environment in SPI */ -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SPI_MAX_HZ 48000000 -#define CONFIG_ENV_SPI_MODE SPI_MODE_0 - -#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE -#define CONFIG_ENV_OFFSET (CONFIG_SPI_FLASH_SIZE - CONFIG_ENV_SECT_SIZE) +/* Environment in eMMC, at the end of 2nd "boot sector" */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE) +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 /* USB Host support */ +#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE #define CONFIG_CMD_USB +/* USB networking support */ +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX + +/* General networking support */ +#define CONFIG_CMD_DHCP + /* Enable keyboard */ -#define CONFIG_TEGRA2_KEYBOARD +#define CONFIG_TEGRA_KEYBOARD #define CONFIG_KEYBOARD -#undef TEGRA2_DEVICE_SETTINGS -#define TEGRA2_DEVICE_SETTINGS "stdin=serial,tegra-kbc\0" \ - "stdout=serial\0" \ - "stderr=serial\0" +/* USB keyboard */ +#define CONFIG_USB_KEYBOARD + +/* LCD support */ +#define CONFIG_LCD +#define CONFIG_PWM_TEGRA +#define CONFIG_VIDEO_TEGRA +#define LCD_BPP LCD_COLOR16 +#define CONFIG_SYS_WHITE_ON_BLACK +#define CONFIG_CONSOLE_SCROLL_LINES 10 + +/* NAND support */ +#define CONFIG_CMD_NAND +#define CONFIG_TEGRA_NAND + +/* Max number of NAND devices */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +#include "tegra-common-post.h" + #endif /* __CONFIG_H */