X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fscb9328.h;h=1494a2ecc49721e2227c88a11d26f4816a3c2263;hb=63777665169971ee2d8a69b8ebfbc71f6acf2924;hp=2f166c9d861051881ccc89501fba2d7e29fe027f;hpb=dfc91c33957c95da34e3888dc87912d5c15a7603;p=oweals%2Fu-boot.git

diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h
index 2f166c9d86..1494a2ecc4 100644
--- a/include/configs/scb9328.h
+++ b/include/configs/scb9328.h
@@ -35,7 +35,6 @@
  * Select serial console configuration
  */
 
-
 /*
  * BOOTP options
  */
@@ -44,7 +43,6 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
@@ -54,10 +52,9 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 
-#undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_AUTOSCRIPT
-
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
 
 /*
  * Boot options. Setting delay to -1 stops autostart count down.
@@ -90,7 +87,6 @@
 #define CONFIG_SYS_HZ			3686400	     /* incrementer freq: 3.6864 MHz */
 #define CONFIG_SYS_CPUSPEED		0x141	     /* core clock - register value  */
 
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 #define CONFIG_BAUDRATE 115200
 /*
  * Definitions related to passing arguments to kernel.
@@ -98,17 +94,12 @@
 #define CONFIG_CMDLINE_TAG	     1	 /* send commandline to Kernel	     */
 #define CONFIG_SETUP_MEMORY_TAGS     1	 /* send memory definition to kernel */
 #define CONFIG_INITRD_TAG	     1	 /* send initrd params		     */
-#undef	CONFIG_VFD			 /* do not send framebuffer setup    */
-
 
 /*
  * Malloc pool need to host env + 128 Kb reserve for other allocations.
  */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128<<10) )
 
-
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-
 #define CONFIG_STACKSIZE	(120<<10)      /* stack size		     */
 
 #ifdef CONFIG_USE_IRQ
@@ -134,14 +125,10 @@
 #define SCB9328_SDRAM_1		0x08000000	/* SDRAM bank #1	   */
 #define SCB9328_SDRAM_1_SIZE	0x01000000	/* 16 MB		   */
 
-/*
- * Flash Controller settings
- */
-
-/*
- * Hardware drivers
- */
+#define CONFIG_SYS_TEXT_BASE	0x10000000
 
+#define CONFIG_SYS_SDRAM_BASE	SCB9328_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR	(SCB9328_SDRAM_1 + 0xf00000)
 
 /*
  * Configuration for FLASH memory for the Synertronixx board