X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fsc520_cdp.h;h=0042e30057379bfcb6a9fcb8e91e066332ee8dda;hb=df4a0796e86662536df2387ddcf969c2a704bcc2;hp=8b2ec077bd94e167c40018c3cdc3fc48beeb6faa;hpb=3a71b5ca775fc9cf506c12d91925019591446c7c;p=oweals%2Fu-boot.git diff --git a/include/configs/sc520_cdp.h b/include/configs/sc520_cdp.h index 8b2ec077bd..0042e30057 100644 --- a/include/configs/sc520_cdp.h +++ b/include/configs/sc520_cdp.h @@ -28,6 +28,7 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define GRUSS_TESTING /* * High Level Configuration Options * (easy to change) @@ -62,26 +63,43 @@ /* * Size of malloc() pool */ -#define CONFIG_MALLOC_SIZE (CFG_ENV_SIZE + 128*1024) - +#define CONFIG_MALLOC_SIZE (CONFIG_ENV_SIZE + 128*1024) #define CONFIG_BAUDRATE 9600 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2 | CFG_CMD_IDE | CFG_CMD_NET | CFG_CMD_EEPROM) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include + +/* + * Command line configuration. + */ +#include + +#define CONFIG_CMD_PCI +#ifndef GRUSS_TESTING +#define CONFIG_CMD_SATA +#else +#undef CONFIG_CMD_SATA +#endif +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_NET +#define CONFIG_CMD_EEPROM #define CONFIG_BOOTDELAY 15 -#define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyS0,9600" +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyS0,9600" /* #define CONFIG_BOOTCOMMAND "bootm 38000000" */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif - /* * Miscellaneous configurable options */ @@ -104,7 +122,6 @@ /* valid baudrates */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /*----------------------------------------------------------------------- * Physical Memory Map */ @@ -113,8 +130,6 @@ /*----------------------------------------------------------------------- * FLASH and environment organization */ - - #define CFG_MAX_FLASH_BANKS 3 /* max number of memory banks */ #define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ @@ -125,16 +140,14 @@ #define CONFIG_SPI_EEPROM /* Support for SPI EEPROMs (AT25128) */ #define CONFIG_MW_EEPROM /* Support for MicroWire EEPROMs (AT93LC46) */ - /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE - /* Environment in EEPROM */ -#define CFG_ENV_IS_IN_EEPROM 1 +#define CONFIG_ENV_IS_IN_EEPROM 1 #define CONFIG_SPI -#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment EEPROM 16k is SPI is used or 128 bytes if MW is used*/ -#define CFG_ENV_OFFSET 0 +#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment EEPROM 16k is SPI is used or 128 bytes if MW is used*/ +#define CONFIG_ENV_OFFSET 0 #define CONFIG_SC520_CDP_USE_SPI /* Store configuration in the SPI part */ #undef CONFIG_SC520_CDP_USE_MW /* Store configuration in the MicroWire part */ #define CONFIG_SPI_X 1 @@ -164,36 +177,21 @@ #define CONFIG_PCNET_79C975 #define PCNET_HAS_PROM 1 -/************************************************************ - * IDE/ATA stuff - ************************************************************/ -#define CFG_IDE_MAXBUS 1 /* max. 2 IDE busses */ -#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */ - -#define CFG_ATA_IDE0_OFFSET 0x01F0 /* ide0 offste */ -/*#define CFG_ATA_IDE1_OFFSET 0x0170 /###* ide1 offset */ -#define CFG_ATA_DATA_OFFSET 0 /* data reg offset */ -#define CFG_ATA_REG_OFFSET 0 /* reg offset */ -#define CFG_ATA_ALT_OFFSET 0x200 /* alternate register offset */ -#define CFG_ATA_BASE_ADDR 0 - -#undef CONFIG_IDE_LED /* no led for ide supported */ -#undef CONFIG_IDE_RESET /* reset for ide unsupported... */ -#undef CONFIG_IDE_RESET_ROUTINE /* no special reset function */ - /************************************************************ *SATA/Native Stuff ************************************************************/ -#define CFG_SATA_SUPPORTED 1 +#ifndef GRUSS_TESTING #define CFG_SATA_MAXBUS 2 /*Max Sata buses supported */ #define CFG_SATA_DEVS_PER_BUS 2 /*Max no. of devices per bus/port */ -#define CFG_SATA_MAXDEVICES (CFG_SATA_MAXBUS* CFG_SATA_DEVS_PER_BUS) -#define CFG_ATA_PIIX 1 /*Supports ata_piix driver */ +#define CFG_SATA_MAX_DEVICE (CFG_SATA_MAXBUS* CFG_SATA_DEVS_PER_BUS) +#define CONFIG_ATA_PIIX 1 /*Supports ata_piix driver */ +#else +#undef CFG_SATA_MAXBUS +#undef CFG_SATA_DEVS_PER_BUS +#undef CFG_SATA_MAX_DEVICE +#undef CONFIG_ATA_PIIX +#endif -/************************************************************ - * ATAPI support (experimental) - ************************************************************/ -#define CONFIG_ATAPI /* enable ATAPI Support */ /************************************************************ * DISK Partition support @@ -205,11 +203,14 @@ /************************************************************ * Video/Keyboard support ************************************************************/ +#ifndef GRUSS_TESTING #define CONFIG_VIDEO /* To enable video controller support */ +#else +#undef CONFIG_VIDEO +#endif #define CONFIG_I8042_KBD #define CFG_ISA_IO 0 - /************************************************************ * RTC ***********************************************************/ @@ -219,6 +220,7 @@ /* * PCI stuff */ +#ifndef GRUSS_TESTING #define CONFIG_PCI /* include pci support */ #define CONFIG_PCI_PNP /* pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW @@ -227,5 +229,11 @@ #define CFG_SECOND_PCI_IRQ 9 #define CFG_THIRD_PCI_IRQ 11 #define CFG_FORTH_PCI_IRQ 15 +#else +#undef CONFIG_PCI +#undef CONFIG_PCI_PNP +#undef CONFIG_PCI_SCAN_SHOW +#endif + #endif /* __CONFIG_H */