X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fsc3.h;h=f6e40def518688d4da8c4f00320ecc66041f3260;hb=7e492d8258182e31c988bbf9917d4a3d41949d56;hp=e4357b088542a4ea7052c0b8c1b288639bcf223b;hpb=448f5fea4c7dd531b69e4e60eed2a72b89b4ed6d;p=oweals%2Fu-boot.git

diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index e4357b0885..f6e40def51 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -68,8 +68,7 @@
  * Define IDE_USES_ISA_EMULATION for slower IDE access in the ISA-IO address range
  * If undefined, IDE access uses a seperat emulation with higher access speed.
  * Consider to inform your Linux IDE driver about the different addresses!
- * IDE_USES_ISA_EMULATION is only used if your CONFIG_COMMANDS macro includes
- * the CFG_CMD_IDE macro!
+ * IDE_USES_ISA_EMULATION is only used if you define CONFIG_CMD_IDE!
  */
 #define IDE_USES_ISA_EMULATION
 
@@ -98,7 +97,7 @@
 #define CONFIG_BOOTDELAY	3 /* autoboot after 3 seconds	      */
 
 #define CONFIG_PREBOOT	"echo;"	\
-	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 	"echo"
 
 #undef	CONFIG_BOOTARGS
@@ -169,25 +168,36 @@
 #define CONFIG_MII 1			/* add 405GP MII PHY management		*/
 #define CONFIG_PHY_ADDR 1	/* the connected Phy defaults to address 1 */
 
-#define CONFIG_COMMANDS	  \
-	   (CONFIG_CMD_DFL	| \
-			CFG_CMD_AUTOSCRIPT	| \
-			CFG_CMD_PCI		| \
-			CFG_CMD_IRQ		| \
-			CFG_CMD_NET		| \
-			CFG_CMD_MII		| \
-			CFG_CMD_PING		| \
-			CFG_CMD_NAND		| \
-			CFG_CMD_JFFS2		| \
-			CFG_CMD_I2C		| \
-			CFG_CMD_IDE		| \
-			CFG_CMD_DATE		| \
-			CFG_CMD_DHCP		| \
-			CFG_CMD_CACHE		| \
-			CFG_CMD_ELF	)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+
+#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_ELF
+
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -277,7 +287,7 @@
  * External peripheral base address
  *-----------------------------------------------------------------------
  */
-#if !(CONFIG_COMMANDS & CFG_CMD_IDE)
+#if !defined(CONFIG_CMD_IDE)
 
 #undef	CONFIG_IDE_LED			/* no led for ide supported	*/
 #undef	CONFIG_IDE_RESET		/* no reset for ide supported	*/
@@ -286,7 +296,7 @@
  * IDE/ATA stuff
  *-----------------------------------------------------------------------
  */
-#else /* !(CONFIG_COMMANDS & CFG_CMD_IDE) */
+#else
 #define CONFIG_START_IDE	1	/* check, if use IDE */
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* no pcmcia interface required */
@@ -346,7 +356,7 @@
 
 #endif /* IDE_USES_ISA_EMULATION */
 
-#endif /* !(CONFIG_COMMANDS & CFG_CMD_IDE) */
+#endif
 
 /*
 #define	CFG_KEY_REG_BASE_ADDR	0xF0100000
@@ -423,24 +433,6 @@ extern unsigned long offsetOfEnvironment;
 #define CONFIG_JFFS2_PART_SIZE		0x01000000
 #define CONFIG_JFFS2_PART_OFFSET	0x00000000
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- *
- * CFG_DCACHE_SIZE -> size of data cache:
- * - 405GP 8k
- * - 405GPr 16k
- * How to handle the difference in chache size?
- * CFG_CACHELINE_SIZE -> size of one cache line: 32 bytes
- * (used in cpu/ppc4xx/start.S)
-*/
-#define CFG_DCACHE_SIZE    16384
-
-#define CFG_CACHELINE_SIZE 32
-
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
- #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *