X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fsama5d3_xplained.h;h=05600c81ff21f5bde286f0bdbd003b80b0591ee8;hb=ceff355a5f3038ddb49618d9adc716b0ed978aea;hp=d1881bbc4b25afc5219b3d5a4bbd1730725ac01f;hpb=cc4288ef42be5bf70e7dc0fa5eb977cb4a6e894e;p=oweals%2Fu-boot.git

diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h
index d1881bbc4b..05600c81ff 100644
--- a/include/configs/sama5d3_xplained.h
+++ b/include/configs/sama5d3_xplained.h
@@ -10,16 +10,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/* No NOR flash, this definition should put before common header */
-#define CONFIG_SYS_NO_FLASH
-
 #include "at91-sama5_common.h"
 
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
-#define CONFIG_USART_ID			ATMEL_ID_DBGU
-
 /*
  * This needs to be defined for the OHCI code to work but it is defined as
  * ATMEL_ID_UHPHS in the CPU specific header files.
@@ -37,15 +29,13 @@
 #define CONFIG_SYS_SDRAM_SIZE		0x10000000
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_INIT_SP_ADDR		0x310000
+#define CONFIG_SYS_INIT_SP_ADDR		0x318000
 #else
 #define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 #endif
 
 /* NAND flash */
-#define CONFIG_CMD_NAND
-
 #ifdef CONFIG_CMD_NAND
 #define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
@@ -55,38 +45,15 @@
 /* our CLE is AD22 */
 #define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
 #define CONFIG_SYS_NAND_ONFI_DETECTION
+
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#endif
 /* PMECC & PMERRLOC */
 #define CONFIG_ATMEL_NAND_HWECC
 #define CONFIG_ATMEL_NAND_HW_PMECC
 #define CONFIG_PMECC_CAP		4
 #define CONFIG_PMECC_SECTOR_SIZE	512
-#define CONFIG_CMD_NAND_TRIMFFS
-#define CONFIG_CMD_MTDPARTS
-
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#endif
-
-/* Ethernet Hardware */
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT		20
-#define CONFIG_MACB_SEARCH_PHY
-#define CONFIG_RGMII
-#define CONFIG_PHYLIB
-
-/* MMC */
-
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_GENERIC_ATMEL_MCI
-#define CONFIG_ATMEL_MCI_8BIT
-#endif
 
 /* USB */
 
@@ -98,11 +65,6 @@
 #define CONFIG_SYS_USB_OHCI_REGS_BASE		ATMEL_BASE_OHCI
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME		"SAMA5D3 Xplained"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
-#define CONFIG_DOS_PARTITION
-#endif
-
-#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
-#define CONFIG_FAT_WRITE
 #endif
 
 #define CONFIG_SYS_LOAD_ADDR			0x22000000 /* load address */
@@ -111,34 +73,24 @@
 /* override the bootcmd, bootargs and other configuration for nandflash env */
 #elif CONFIG_SYS_USE_MMC
 /* override the bootcmd, bootargs and other configuration for sd/mmc env */
-#else
-#define CONFIG_ENV_IS_NOWHERE
 #endif
 
 /* SPL */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x300000
-#define CONFIG_SPL_MAX_SIZE		0x10000
+#define CONFIG_SPL_MAX_SIZE		0x18000
 #define CONFIG_SPL_BSS_START_ADDR	0x20000000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
-#define CONFIG_SPL_SERIAL_SUPPORT
-
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
 
 #ifdef CONFIG_SYS_USE_MMC
-#define CONFIG_SPL_LDSCRIPT		arch/arm/mach-at91/armv7/u-boot-spl.lds
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 
 #elif CONFIG_SYS_USE_NANDFLASH
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000