X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fsama5d2_ptc.h;h=16bafc0990767bbabc37dd7707717dfd592e9646;hb=e627290ac63c4d43b24407179d7439dd50a50bfe;hp=d91d75eb4021148cc7426d8c8b38322a4b4cb3da;hpb=dc557e9a1fe00ca9d884bd88feef5bebf23fede4;p=oweals%2Fu-boot.git

diff --git a/include/configs/sama5d2_ptc.h b/include/configs/sama5d2_ptc.h
index d91d75eb40..16bafc0990 100644
--- a/include/configs/sama5d2_ptc.h
+++ b/include/configs/sama5d2_ptc.h
@@ -10,9 +10,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/* No NOR flash, this definition should put before common header */
-#define CONFIG_SYS_NO_FLASH
-
 #include "at91-sama5_common.h"
 
 /* serial console */
@@ -72,7 +69,6 @@
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_ATMEL
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
-#define CONFIG_USB_STORAGE
 #endif
 
 /* USB device */
@@ -85,7 +81,6 @@
 
 #if defined(CONFIG_CMD_USB)
 #define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
 #endif
 
 /* Ethernet Hardware */
@@ -122,22 +117,14 @@
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
 
 #ifdef CONFIG_SYS_USE_SERIALFLASH
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8000
 
 #elif CONFIG_SYS_USE_NANDFLASH
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_PMECC_CAP		8