X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fr2dplus.h;h=65dcffb29be495ea88b83f12a2626cdb803aebdc;hb=91dd7ca6ac9b9b760a1671ec845d4401a13df11e;hp=6fa1eafde7ddd054a5d562857196c6b906eeb01b;hpb=2db0e1278b9f11263e0a13326b57d4f99781f7ac;p=oweals%2Fu-boot.git

diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h
index 6fa1eafde7..65dcffb29b 100644
--- a/include/configs/r2dplus.h
+++ b/include/configs/r2dplus.h
@@ -15,7 +15,6 @@
  */
 #include <config_cmd_default.h>
 
-#define CONFIG_CMD_DFL
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_FLASH
 #define CONFIG_CMD_PCI
@@ -24,12 +23,13 @@
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_EXT2
 #define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_SH_ZIMAGEBOOT
 
 /* SCIF */
 #define CONFIG_SCIF_CONSOLE	1
 #define CONFIG_BAUDRATE		115200
 #define CONFIG_CONS_SCIF1	1
-#define BOARD_LATE_INIT		1
+#define CONFIG_BOARD_LATE_INIT
 
 #define CONFIG_BOOTDELAY	-1
 #define CONFIG_BOOTARGS		"console=ttySC0,115200"
@@ -39,17 +39,16 @@
 #define CONFIG_SYS_SDRAM_BASE		(0x8C000000)
 #define CONFIG_SYS_SDRAM_SIZE		(0x04000000)
 
+#define CONFIG_SYS_TEXT_BASE	0x0FFC0000
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_SYS_PROMPT		"=> "
 #define CONFIG_SYS_CBSIZE		256
 #define CONFIG_SYS_PBSIZE		256
 #define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_BARGSIZE		512
-/* List of legal baudrate settings for this board */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }
 
 #define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE)
-#define CONFIG_SYS_MEMTEST_END		(TEXT_BASE - 0x100000)
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_TEXT_BASE - 0x100000)
 
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)
 /* Address of u-boot image in Flash */
@@ -57,8 +56,6 @@
 #define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
 /* Size of DRAM reserved for malloc() use */
 #define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)
-/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE	(256)
 #define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
 
 /*
@@ -80,8 +77,8 @@
  * SuperH Clock setting
  */
 #define CONFIG_SYS_CLK_FREQ	60000000
-#define TMU_CLK_DIVIDER		4
-#define CONFIG_SYS_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_TMU_CLK_DIV		4
+#define CONFIG_SYS_HZ		1000
 #define	CONFIG_SYS_PLL_SETTLING_TIME	100/* in us */
 
 /*
@@ -96,6 +93,7 @@
 #define CONFIG_SYS_ATA_DATA_OFFSET	0x1000	/* data reg offset */
 #define CONFIG_SYS_ATA_REG_OFFSET	0x1000	/* reg offset */
 #define CONFIG_SYS_ATA_ALT_OFFSET	0x800	/* alternate register offset */
+#define CONFIG_IDE_SWAP_IO
 
 /*
  * SuperH PCI Bridge Configration
@@ -121,9 +119,6 @@
 /*
  * Network device (RTL8139) support
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_RTL8139
-#define _IO_BASE		0x00000000
-#define KSEG1ADDR(x)		(x)
 
 #endif /* __CONFIG_H */