X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fppmc8260.h;h=7018a8c3c78d2f4acf9b96b77cb1894cf0260696;hb=aaa2a2fc9b81e0619da85244f5e9193a0a60003a;hp=ff7d61439bb6a04ebe69f522573f9a2d7065c4c1;hpb=50bd0057ba8fceeb48533f8b1a652ccd0e170838;p=oweals%2Fu-boot.git

diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h
index ff7d61439b..7018a8c3c7 100644
--- a/include/configs/ppmc8260.h
+++ b/include/configs/ppmc8260.h
@@ -34,6 +34,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define	CONFIG_SYS_TEXT_BASE	0xfe000000
+
 /*****************************************************************************
  *
  * These settings must match the way _your_ board is set up
@@ -76,7 +78,7 @@
 #define CONFIG_SYS_PPMC_BOOT_LOW 1
 
 /* What should the base address of the main FLASH be and how big is
- * it (in MBytes)? This must contain TEXT_BASE from board/ppmc8260/config.mk
+ * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE from board/ppmc8260/config.mk
  * The main FLASH is whichever is connected to *CS0. U-Boot expects
  * this to be the SIMM.
  */
@@ -182,6 +184,10 @@
  * Port pins used for bit-banged MII communictions (if applicable).
  */
 #define MDIO_PORT	2	/* Port C */
+#define MDIO_DECLARE	volatile ioport_t *iop = ioport_addr ( \
+				(immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
+#define MDC_DECLARE	MDIO_DECLARE
+
 #define MDIO_ACTIVE	(iop->pdir |=  0x00400000)
 #define MDIO_TRISTATE	(iop->pdir &= ~0x00400000)
 #define MDIO_READ	((iop->pdat &  0x00400000) != 0)
@@ -1000,13 +1006,4 @@
 			 ORxG_TRLX		       |\
 			 ORxG_EHTR)
 #endif /* CONFIG_SYS_LED_BASE */
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM	0x02	/* Software reboot		     */
-
 #endif	/* __CONFIG_H */