X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fpm9263.h;h=7f87edb42d390cd567920fa1b4ffd3addf799f6d;hb=b77d0292ca9f3ca69259dca7e2c5e193a403b289;hp=c4990883af266945b6457623303ff0d6c1a0401a;hpb=4bafceff0e9e5a36908031e41c69a6b37e82da58;p=oweals%2Fu-boot.git

diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index c4990883af..7f87edb42d 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2007-2008
  * Stelian Pop <stelian@popies.net>
@@ -5,8 +6,6 @@
  * Ilko Iliev <www.ronetix.at>
  *
  * Configuation settings for the RONETIX PM9263 board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -27,8 +26,6 @@
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 
 #define CONFIG_SYS_AT91_CPU_NAME	"AT91SAM9263"
-#define CONFIG_PM9263		1	/* on a Ronetix PM9263 Board	*/
-#define CONFIG_ARCH_CPU_INIT
 
 #define CONFIG_MACH_TYPE	MACH_TYPE_PM9263
 
@@ -170,13 +167,10 @@
 #define CONFIG_BOOTP_BOOTFILESIZE	1
 
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS	1
 #define PHYS_SDRAM		0x20000000
 #define PHYS_SDRAM_SIZE		0x04000000	/* 64 megs */
 
 /* NOR flash, if populated */
-#define CONFIG_SYS_FLASH_CFI		1
-#define CONFIG_FLASH_CFI_DRIVER		1
 #define PHYS_FLASH_1			0x10000000
 #define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 #define CONFIG_SYS_MAX_FLASH_SECT	256
@@ -184,7 +178,6 @@
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x40000000
 #define CONFIG_SYS_NAND_DBW_8		1
@@ -229,9 +222,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
 
-#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END			0x23e00000
-
 #define CONFIG_SYS_USE_FLASH	1
 #undef CONFIG_SYS_USE_DATAFLASH
 #undef CONFIG_SYS_USE_NANDFLASH
@@ -239,10 +229,6 @@
 #ifdef CONFIG_SYS_USE_DATAFLASH
 
 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_ENV_OFFSET	0x4200
-#define CONFIG_ENV_SIZE		0x4200
-#define CONFIG_ENV_SECT_SIZE	0x210
-#define CONFIG_ENV_SPI_MAX_HZ	15000000
 #define CONFIG_BOOTCOMMAND	"sf probe 0; " \
 				"sf read 0x22000000 0x84000 0x294000; " \
 				"bootm 0x22000000"
@@ -250,16 +236,10 @@
 #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CFG_USE_NANDFLASH */
 
 /* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_OFFSET		0x60000
-#define CONFIG_ENV_OFFSET_REDUND	0x80000
-#define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
 
 #elif defined(CONFIG_SYS_USE_FLASH) /* CFG_USE_FLASH */
 
-#define CONFIG_ENV_OFFSET	0x40000
-#define CONFIG_ENV_SECT_SIZE	0x10000
-#define	CONFIG_ENV_SIZE		0x10000
 #define CONFIG_ENV_OVERWRITE	1
 
 /* JFFS Partition offset set */