X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fpb1x00.h;h=972c13a6251e93d69c321e140422fef5dc47ec0f;hb=39bcbb7740b099b487b20ff6e345eb790a85712c;hp=1c04a58e9fed7428afaa517c89dc5d68c4c39c08;hpb=0e1dc3456fef34832ef67161f4a96d90363294ec;p=oweals%2Fu-boot.git

diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h
index 1c04a58e9f..972c13a625 100644
--- a/include/configs/pb1x00.h
+++ b/include/configs/pb1x00.h
@@ -29,14 +29,7 @@
 #endif
 #endif
 
-#define CONFIG_ETHADDR		DE:AD:BE:EF:01:01    /* Ethernet address */
-
-#define CONFIG_BOOTDELAY	2	/* autoboot after 2 seconds	*/
-
-#define CONFIG_BAUDRATE		115200
-
 #define	CONFIG_TIMESTAMP		/* Print image info with timestamp */
-#undef	CONFIG_BOOTARGS
 
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"addmisc=setenv bootargs ${bootargs} "				\
@@ -51,11 +44,6 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CONFIG_SYS_LONGHELP				/* undef to save memory      */
-#define	CONFIG_SYS_PROMPT		"Pb1x00 # "	/* Monitor Command Prompt    */
-#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size   */
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)  /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS		16		/* max number of command args*/
 
 #define CONFIG_SYS_MALLOC_LEN		128*1024
 
@@ -81,7 +69,6 @@
 #define PHYS_FLASH_1		0xbec00000 /* Flash Bank #1 */
 #define PHYS_FLASH_2		0xbfc00000 /* Flash Bank #2 */
 
-/* The following #defines are needed to get flash environment right */
 #define	CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
 #define	CONFIG_SYS_MONITOR_LEN		(192 << 10)
 
@@ -94,8 +81,6 @@
 #define CONFIG_SYS_FLASH_ERASE_TOUT	(2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
 #define CONFIG_SYS_FLASH_WRITE_TOUT	(2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
-#define	CONFIG_ENV_IS_NOWHERE	1
-
 /* Address and size of Primary Environment Sector	*/
 #define CONFIG_ENV_ADDR		0xB0030000
 #define CONFIG_ENV_SIZE		0x10000
@@ -104,15 +89,11 @@
 
 #define CONFIG_NR_DRAM_BANKS	2
 
-
 #define CONFIG_MEMSIZE_IN_BYTES
 
-
 /*---USB -------------------------------------------*/
 #if 0
 #define CONFIG_USB_OHCI
-#define CONFIG_USB_STORAGE
-#define CONFIG_DOS_PARTITION
 #endif
 
 /*---ATA PCMCIA ------------------------------------*/
@@ -122,7 +103,6 @@
 #define CONFIG_PCMCIA_SLOT_A
 
 #define CONFIG_ATAPI 1
-#define CONFIG_MAC_PARTITION 1
 
 /* We run CF in "true ide" mode or a harddrive via pcmcia */
 #define CONFIG_IDE_PCMCIA 1
@@ -131,7 +111,6 @@
 #define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
 #define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
 #define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
@@ -148,43 +127,14 @@
 #define CONFIG_SYS_ATA_ALT_OFFSET      0x0100
 
 #endif
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_DCACHE_SIZE		16384
-#define CONFIG_SYS_ICACHE_SIZE		16384
-#define CONFIG_SYS_CACHELINE_SIZE	32
-
 
 /*
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
 
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-
-#undef CONFIG_CMD_SAVEENV
-#undef CONFIG_CMD_FAT
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IDE
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_RUN
-#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_ELF
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_BEDBUG
 
 #endif	/* __CONFIG_H */