X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fp1_p2_rdb_pc.h;h=c42f1a9fce7427ded7444c0eca94d9686b373c83;hb=8947145cd0ae8adf1c5dc0ae6756d49bf5330b48;hp=0e1f9836a6485bc297c6b0bf992a820ecff06860;hpb=5548c7a165bbd1ebb0d4599ef1d04751c37b3f79;p=oweals%2Fu-boot.git

diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 0e1f9836a6..c42f1a9fce 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -74,7 +74,6 @@
 #if defined(CONFIG_TARGET_P1021RDB)
 #define CONFIG_BOARDNAME "P1021RDB-PC"
 #define CONFIG_NAND_FSL_ELBC
-#define CONFIG_QE
 #define CONFIG_VSC7385_ENET
 #define CONFIG_SYS_LBC_LBCR	0x00080000	/* Implement conversion of
 						addresses in the LBC */
@@ -105,7 +104,6 @@
 #if defined(CONFIG_TARGET_P1025RDB)
 #define CONFIG_BOARDNAME "P1025RDB"
 #define CONFIG_NAND_FSL_ELBC
-#define CONFIG_QE
 #define CONFIG_SLIC
 
 #define CONFIG_SYS_LBC_LBCR	0x00080000	/* Implement conversion of
@@ -137,7 +135,6 @@
 #ifdef CONFIG_SDCARD
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
-#define CONFIG_SPL_TEXT_BASE		0xf8f81000
 #define CONFIG_SPL_PAD_TO		0x20000
 #define CONFIG_SPL_MAX_SIZE		(128 * 1024)
 #define CONFIG_SYS_MMC_U_BOOT_SIZE	(768 << 10)
@@ -145,8 +142,6 @@
 #define CONFIG_SYS_MMC_U_BOOT_START	(0x11000000)
 #define CONFIG_SYS_MMC_U_BOOT_OFFS	(128 << 10)
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
-#define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot.lds"
-#define CONFIG_SPL_MMC_BOOT
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SPL_COMMON_INIT_DDR
 #endif
@@ -156,7 +151,6 @@
 #define CONFIG_SPL_SPI_FLASH_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
-#define CONFIG_SPL_TEXT_BASE		0xf8f81000
 #define CONFIG_SPL_PAD_TO		0x20000
 #define CONFIG_SPL_MAX_SIZE		(128 * 1024)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE	(768 << 10)
@@ -164,16 +158,13 @@
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START	(0x11000000)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS	(128 << 10)
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
-#define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot.lds"
-#define CONFIG_SPL_SPI_BOOT
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SPL_COMMON_INIT_DDR
 #endif
 #endif
 
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 #ifdef CONFIG_TPL_BUILD
-#define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_NAND_INIT
 #define CONFIG_SPL_COMMON_INIT_DDR
@@ -188,7 +179,6 @@
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
-#define CONFIG_SPL_TEXT_BASE		0xff800000
 #define CONFIG_SPL_MAX_SIZE		4096
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(128 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_DST	0xf8f80000
@@ -199,7 +189,6 @@
 #define CONFIG_SPL_PAD_TO		0x20000
 #define CONFIG_TPL_PAD_TO		0x20000
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
-#define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 #endif
 
 #ifndef CONFIG_RESET_VECTOR_ADDRESS
@@ -218,9 +207,6 @@
 
 #define CONFIG_PCIE1	/* PCIE controller 1 (slot 1) */
 #define CONFIG_PCIE2	/* PCIE controller 2 (slot 2) */
-#define CONFIG_FSL_PCI_INIT	/* Use common FSL init code */
-#define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
-#define CONFIG_FSL_PCIE_RESET	/* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT	/* enable 64-bit PCI resources */
 
 #define CONFIG_ENV_OVERWRITE
@@ -266,7 +252,6 @@
 #define CONFIG_DDR_SPD
 #define CONFIG_SYS_SPD_BUS_NUM 1
 #define SPD_EEPROM_ADDRESS 0x52
-#undef CONFIG_FSL_DDR_INTERACTIVE
 
 #if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD))
 #define CONFIG_SYS_SDRAM_SIZE_LAW	LAW_SIZE_2G
@@ -457,7 +442,7 @@
 				 OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
 				 OR_GPCM_EAD)
 
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 #define CONFIG_SYS_BR0_PRELIM	CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
 #define CONFIG_SYS_OR0_PRELIM	CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 #define CONFIG_SYS_BR1_PRELIM	CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
@@ -513,7 +498,7 @@
 #else
 #define CONFIG_SPL_RELOC_MALLOC_SIZE	(108 << 10)
 #endif
-#elif defined(CONFIG_NAND)
+#elif defined(CONFIG_MTD_RAW_NAND)
 #ifdef CONFIG_TPL_BUILD
 #define CONFIG_SYS_INIT_L2_ADDR		0xf8f80000
 #define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
@@ -578,11 +563,6 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 
-#if defined(CONFIG_SPI_FLASH)
-#define CONFIG_SF_DEFAULT_SPEED	10000000
-#define CONFIG_SF_DEFAULT_MODE	0
-#endif
-
 #if defined(CONFIG_PCI)
 /*
  * General PCI
@@ -590,44 +570,56 @@
  */
 
 /* controller 2, direct to uli, tgtid 2, Base address 9000 */
-#define CONFIG_SYS_PCIE2_NAME		"PCIe SLOT"
 #define CONFIG_SYS_PCIE2_MEM_VIRT	0xa0000000
 #ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE2_MEM_BUS	0xc0000000
 #define CONFIG_SYS_PCIE2_MEM_PHYS	0xc20000000ull
 #else
-#define CONFIG_SYS_PCIE2_MEM_BUS	0xa0000000
 #define CONFIG_SYS_PCIE2_MEM_PHYS	0xa0000000
 #endif
-#define CONFIG_SYS_PCIE2_MEM_SIZE	0x20000000	/* 512M */
 #define CONFIG_SYS_PCIE2_IO_VIRT	0xffc10000
-#define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_SYS_PCIE2_IO_PHYS	0xfffc10000ull
 #else
 #define CONFIG_SYS_PCIE2_IO_PHYS	0xffc10000
 #endif
-#define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */
 
 /* controller 1, Slot 2, tgtid 1, Base address a000 */
-#define CONFIG_SYS_PCIE1_NAME		"mini PCIe SLOT"
 #define CONFIG_SYS_PCIE1_MEM_VIRT	0x80000000
 #ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
 #define CONFIG_SYS_PCIE1_MEM_PHYS	0xc00000000ull
 #else
-#define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
 #define CONFIG_SYS_PCIE1_MEM_PHYS	0x80000000
 #endif
-#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
 #define CONFIG_SYS_PCIE1_IO_VIRT	0xffc00000
-#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_SYS_PCIE1_IO_PHYS	0xfffc00000ull
 #else
 #define CONFIG_SYS_PCIE1_IO_PHYS	0xffc00000
 #endif
+
+#if !defined(CONFIG_DM_PCI)
+#define CONFIG_FSL_PCI_INIT	/* Use common FSL init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE
+#define CONFIG_SYS_PCIE2_NAME		"PCIe SLOT"
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE2_MEM_BUS	0xc0000000
+#else
+#define CONFIG_SYS_PCIE2_MEM_BUS	0xa0000000
+#endif
+#define CONFIG_SYS_PCIE2_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
+#define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */
+
+#define CONFIG_SYS_PCIE1_NAME		"mini PCIe SLOT"
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
+#else
+#define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
+#endif
+#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
 #define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
+#endif
 
 #define CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
 #endif /* CONFIG_PCI */
@@ -661,7 +653,6 @@
 
 #ifdef CONFIG_QE
 /* QE microcode/firmware address */
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 #define CONFIG_SYS_QE_FW_ADDR	0xefec0000
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
 #endif /* CONFIG_QE */
@@ -705,34 +696,16 @@
 /*
  * Environment
  */
-#ifdef CONFIG_SPIFLASH
-#define CONFIG_ENV_SPI_BUS	0
-#define CONFIG_ENV_SPI_CS	0
-#define CONFIG_ENV_SPI_MAX_HZ	10000000
-#define CONFIG_ENV_SPI_MODE	0
-#define CONFIG_ENV_SIZE		0x2000	/* 8KB */
-#define CONFIG_ENV_OFFSET	0x100000	/* 1MB */
-#define CONFIG_ENV_SECT_SIZE	0x10000
-#elif defined(CONFIG_SDCARD)
+#if defined(CONFIG_SDCARD)
 #define CONFIG_FSL_FIXED_MMC_LOCATION
-#define CONFIG_ENV_SIZE		0x2000
 #define CONFIG_SYS_MMC_ENV_DEV	0
-#elif defined(CONFIG_NAND)
+#elif defined(CONFIG_MTD_RAW_NAND)
+#define CONFIG_ENV_RANGE	(3 * CONFIG_ENV_SIZE)
 #ifdef CONFIG_TPL_BUILD
-#define CONFIG_ENV_SIZE		0x2000
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
-#else
-#define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
+#define SPL_ENV_ADDR		(CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
 #endif
-#define CONFIG_ENV_OFFSET	(1024 * 1024)
-#define CONFIG_ENV_RANGE	(3 * CONFIG_ENV_SIZE)
 #elif defined(CONFIG_SYS_RAMBOOT)
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
-#define CONFIG_ENV_SIZE		0x2000
-#else
-#define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE		0x2000
-#define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K (one sector) */
+#define SPL_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
 #endif
 
 #define CONFIG_LOADS_ECHO		/* echo on for serial download */