X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fot1200.h;h=55e716a22aa1bcaaad154421e170173dfbf0a2eb;hb=432e39806805c46d583e75e8dd2f7b71cc6089c1;hp=879ad58fc4ae87598d1228130cc97d14f81620ba;hpb=f1993ca066100fcaba7d49fecae0ef604e5807e2;p=oweals%2Fu-boot.git

diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h
index 879ad58fc4..55e716a22a 100644
--- a/include/configs/ot1200.h
+++ b/include/configs/ot1200.h
@@ -13,7 +13,6 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_MISC_INIT_R
 
 /* UART Configs */
@@ -21,7 +20,6 @@
 #define CONFIG_MXC_UART_BASE           UART1_BASE
 
 /* SF Configs */
-#define CONFIG_CMD_SF
 #define CONFIG_SPI
 #define CONFIG_MXC_SPI
 #define CONFIG_SF_DEFAULT_BUS  2
@@ -33,11 +31,8 @@
 #define CONFIG_PCA953X
 #define CONFIG_SYS_I2C_PCA953X_ADDR	0x20
 #define CONFIG_SYS_I2C_PCA953X_WIDTH	{ {0x20, 16} }
-#define CONFIG_CMD_PCA953X
-#define CONFIG_CMD_PCA953X_INFO
 
 /* I2C Configs */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
@@ -46,7 +41,6 @@
 #define CONFIG_SYS_I2C_SPEED            100000
 
 /* OCOTP Configs */
-#define CONFIG_CMD_IMXOTP
 #define CONFIG_IMX_OTP
 #define IMX_OTP_BASE                    OCOTP_BASE_ADDR
 #define IMX_OTP_ADDR_MAX                0x7F
@@ -58,17 +52,9 @@
 #define CONFIG_SYS_FSL_USDHC_NUM       2
 
 /* USB Configs */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 
-#ifdef CONFIG_MX6Q
-#define CONFIG_CMD_SATA
-#endif
-
 /*
  * SATA Configs
  */
@@ -81,31 +67,22 @@
 #define CONFIG_LIBATA
 #endif
 
-
 /* SPL */
 #ifdef CONFIG_SPL
 #include "imx6_spl.h"
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     (64 * 1024)
 #define CONFIG_SPL_SPI_LOAD
 #endif
 
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE             MII100
 #define CONFIG_ETHPRIME                 "FEC"
 #define CONFIG_FEC_MXC_PHYADDR          0x5
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_SMSC
 
 #ifndef CONFIG_SPL
-#define CONFIG_CMD_EEPROM
 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_I2C_EEPROM_BUS             1
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN        1
@@ -113,13 +90,10 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 #endif
 
-/* Miscellaneous commands */
-#define CONFIG_CMD_BMODE
-
 #define CONFIG_PREBOOT                 ""
 
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+/* Thermal support */
+#define CONFIG_IMX_THERMAL
 
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
@@ -135,7 +109,6 @@
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 /* Environment organization */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SIZE                 (64 * 1024)	/* 64 kb */
 #define CONFIG_ENV_OFFSET               (1024 * 1024)
 /* M25P16 has an erase size of 64 KiB */