X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap730p2.h;h=f24b765ee82cc609a8abd8df3bb9bef0f5979ee4;hb=a51425d2a4e51381423bff9329042e66fedb7cb6;hp=166d592ccdbbf5a09d0e03436ade86207843a0c0;hpb=f61f1e150c84f5b9347fca79a4bc5f2286c545d2;p=oweals%2Fu-boot.git

diff --git a/include/configs/omap730p2.h b/include/configs/omap730p2.h
index 166d592ccd..f24b765ee8 100644
--- a/include/configs/omap730p2.h
+++ b/include/configs/omap730p2.h
@@ -47,10 +47,6 @@
 
 #define CONFIG_SYS_CLK_FREQ	   13000000
 
-#undef CONFIG_USE_IRQ			     /* we don't need IRQ/FIQ stuff */
-
-#define CONFIG_MISC_INIT_R
-
 #define CONFIG_CMDLINE_TAG	   1	     /* enable passing of ATAGs	 */
 #define CONFIG_SETUP_MEMORY_TAGS   1
 
@@ -59,13 +55,12 @@
  */
 
 #define CONFIG_SYS_MALLOC_LEN		   (CONFIG_ENV_SIZE + 128*1024)
-#define CONFIG_SYS_GBL_DATA_SIZE	   128	     /* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
  */
 
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE	   0x04000300
 #define CONFIG_LAN91C96_EXT_PHY
 
@@ -88,8 +83,6 @@
 
 #define CONFIG_CONS_INDEX	   1
 #define CONFIG_BAUDRATE		   115200
-#define CONFIG_SYS_BAUDRATE_TABLE	   { 9600, 19200, 38400, 57600, 115200 }
-
 
 /*
  * Command line configuration.
@@ -142,30 +135,15 @@
 #define CONFIG_SYS_MEMTEST_START	   0x10000000	       /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		   0x12000000	       /* 32 MB in DRAM	   */
 
-#undef CONFIG_SYS_CLKS_IN_HZ		     /* everything, incl board info, in Hz */
-
 #define CONFIG_SYS_LOAD_ADDR		   0x10000000	       /* default load address */
 
 /* The OMAP730 has 3 general purpose MPU timers, they can be driven by
  * the RefClk (12Mhz) or by DPLL1. This time is further subdivided by a
  * local divisor.
  */
-
-#define CONFIG_SYS_TIMERBASE		   0xFFFEC500	       /* use timer 1 */
-#define CONFIG_SYS_PVT			   7		       /* 2^(pvt+1), divide by 256 */
-#define CONFIG_SYS_HZ			   ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PVT))
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-
-#define CONFIG_STACKSIZE	   (128*1024)	  /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	   (4*1024)	  /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	   (4*1024)	  /* FIQ stack */
-#endif
+#define CONFIG_SYS_TIMERBASE		0xFFFEC500	/* use timer 1 */
+#define CONFIG_SYS_PTV			7	/* 2^(PTV+1), divide by 256 */
+#define CONFIG_SYS_HZ			((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV))
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
@@ -183,6 +161,8 @@
 #error Unknown Boot Chip-Select number
 #endif
 
+#define PHYS_SRAM		0x20000000
+
 #define CONFIG_SYS_FLASH_BASE		   PHYS_FLASH_1
 
 /*-----------------------------------------------------------------------
@@ -203,4 +183,7 @@
 #define CONFIG_ENV_SIZE		   0x20000	  /* Total Size of Environment Sector */
 #define CONFIG_ENV_OFFSET		   0x20000	  /* environment starts here  */
 
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR 	PHYS_SRAM
+
 #endif	  /* ! __CONFIG_H */