X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap5_uevm.h;h=53589c03ead87345490ae9fb20324e02fec8fcef;hb=97c42757717f8de780de41857db15d1ba47e9e44;hp=0d1c43c2eb570dbdce1749c30000f65eaca8e7ac;hpb=e62d5fb0da76ef168e90cae9bbbda80349aaf137;p=oweals%2Fu-boot.git

diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index 0d1c43c2eb..53589c03ea 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -1,72 +1,62 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2013
  * Texas Instruments Incorporated.
  * Sricharan R	  <r.sricharan@ti.com>
  *
  * Configuration settings for the TI EVM5430 board.
- * See omap5_common.h for omap5 common settings.
- *
- * SPDX-License-Identifier:	GPL-2.0+ 
+ * See ti_omap5_common.h for omap5 common settings.
  */
 
 #ifndef __CONFIG_OMAP5_EVM_H
 #define __CONFIG_OMAP5_EVM_H
 
+#include <environment/ti/dfu.h>
+
+#ifndef CONFIG_SPL_BUILD
 /* Define the default GPT table for eMMC */
 #define PARTS_DEFAULT \
 	"uuid_disk=${uuid_gpt_disk};" \
 	"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
+#endif
+
+#define DFUARGS \
+	"dfu_bufsiz=0x10000\0" \
+	DFU_ALT_INFO_MMC \
+	DFU_ALT_INFO_EMMC \
+	DFU_ALT_INFO_RAM
 
-#include <configs/omap5_common.h>
+#include <configs/ti_omap5_common.h>
 
-#define CONFIG_CONS_INDEX		3
 #define CONFIG_SYS_NS16550_COM3		UART3_BASE
-#define CONFIG_BAUDRATE			115200
 
 /* MMC ENV related defines */
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		1	/* SLOT2: eMMC(1) */
-#define CONFIG_ENV_OFFSET		0xE0000
-#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_CMD_SAVEENV
 
 /* Enhance our eMMC support / experience. */
-#define CONFIG_CMD_GPT
-#define CONFIG_EFI_PARTITION
-#define CONFIG_PARTITION_UUIDS
-#define CONFIG_CMD_PART
+#define CONFIG_HSMMC2_8BIT
 
 /* Required support for the TCA642X GPIO we have on the uEVM */
 #define CONFIG_TCA642X
-#define CONFIG_CMD_TCA642X
 #define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4
 #define CONFIG_SYS_I2C_TCA642X_ADDR 0x22
 
 /* USB UHH support options */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_HOST
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_OMAP
-#define CONFIG_USB_STORAGE
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80
 #define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 79
 
 /* Enabled commands */
-#define CONFIG_CMD_DHCP		/* DHCP Support			*/
-#define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
-#define CONFIG_CMD_NFS		/* NFS support			*/
 
 /* USB Networking options */
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_SMSC95XX
 
-#define CONSOLEDEV		"ttyO2"
+#define CONSOLEDEV		"ttyS2"
 
-/* Max time to hold reset on this board, see doc/README.omap-reset-time */
-#define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC	16296
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
+#define CONFIG_SYS_SCSI_MAX_LUN		1
+#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+						CONFIG_SYS_SCSI_MAX_LUN)
 
 #endif /* __CONFIG_OMAP5_EVM_H */