X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap3_sdp3430.h;h=404aed2f5f9cbe7a1becc1ff7b97ae3be34ab2c6;hb=2ea73e9e38befa872d215c919f766d837d7a1312;hp=1d6ba7f4a75a68e73cd89905c4127d2960c19b18;hpb=aeabdeb7a33c9cff9ae0cd804521d0d691a7c341;p=oweals%2Fu-boot.git

diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h
index 1d6ba7f4a7..404aed2f5f 100644
--- a/include/configs/omap3_sdp3430.h
+++ b/include/configs/omap3_sdp3430.h
@@ -36,10 +36,8 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
 #define CONFIG_OMAP		1	/* in a TI OMAP core */
 #define CONFIG_OMAP34XX		1	/* which is a 34XX */
-#define CONFIG_OMAP3430		1	/* which is in a 3430 */
 #define CONFIG_OMAP3_3430SDP	1	/* working with SDP Rev2 */
 
 #define CONFIG_SDRC	/* The chip has SDRC controller */
@@ -80,7 +78,6 @@
  */
 #define CONFIG_ENV_SIZE			(256 << 10)
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (256 << 10))
-						/* initial data */
 
 /*--------------------------------------------------------------------------*/
 
@@ -140,9 +137,6 @@
 #define CONFIG_SYS_I2C_BUS_SELECT	1
 #define CONFIG_DRIVER_OMAP34XX_I2C	1
 
-/* DDR - I use Infineon DDR */
-#define CONFIG_OMAP3_INFINEON_DDR	1
-
 /* OMITTED:  single 1 Gbit MT29F1G NAND flash */
 
 /*
@@ -191,8 +185,9 @@
  */
 
 #if defined(CONFIG_CMD_MMC)
+#define CONFIG_GENERIC_MMC		1
 #define CONFIG_MMC			1
-#define CONFIG_OMAP3_MMC		1
+#define CONFIG_OMAP_HSMMC		1
 #define CONFIG_DOS_PARTITION		1
 #endif
 
@@ -202,7 +197,6 @@
  */
 #if defined(CONFIG_CMD_NET)
 
-#define CONFIG_NET_MULTI
 #define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE	DEBUG_BASE
 #define CONFIG_LAN91C96_EXT_PHY
@@ -271,7 +265,7 @@
 #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
 #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_SYS_PROMPT		"OMAP34XX SDP # "
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
 					sizeof(CONFIG_SYS_PROMPT) + 16)
@@ -306,10 +300,6 @@
  * The stack sizes are set up in start.S using the settings below
  */
 #define CONFIG_STACKSIZE	(128 << 10) /* Regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4 << 10) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	(4 << 10) /* FIQ stack */
-#endif
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 #define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
@@ -325,9 +315,6 @@
 #define PHYS_SDRAM_1_SIZE	(32 << 20) /* at least 32 meg */
 #define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
 
-/* SDRAM Bank Allocation method */
-#define SDRC_R_B_C		1
-
 /*--------------------------------------------------------------------------*/
 
 /*
@@ -360,4 +347,6 @@
  *  - rest for filesystem
  */
 
+#define CONFIG_SYS_CACHELINE_SIZE	64
+
 #endif				/* __CONFIG_H */