X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap3_overo.h;h=c58636a5417e765e62ebc7176ffc0d321a2808a6;hb=6c739c5d8a3466f8ef2f8543636484957bcca6ee;hp=e66f30655d67d864a79bcf1f1f21fdffc8c637da;hpb=434f2cfcad9f70231ad5a096325ba72ef0d2a2cc;p=oweals%2Fu-boot.git

diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index e66f30655d..c58636a541 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -35,6 +35,13 @@
 /* TWL4030 LED */
 #define CONFIG_TWL4030_LED
 
+/* USB EHCI */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_OMAP
+#define CONFIG_USB_STORAGE
+#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	183
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
+
 /* Initialize GPIOs by default */
 #define CONFIG_OMAP3_GPIO_2	/* GPIO32..63 is in GPIO Bank 2 */
 #define CONFIG_OMAP3_GPIO_3	/* GPIO64..95 is in GPIO Bank 3 */
@@ -44,6 +51,7 @@
 
 /* commands to include */
 #define CONFIG_CMD_CACHE
+#define CONFIG_CMD_USB
 #undef CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
 #undef CONFIG_CMD_IMI		/* iminfo			*/
 #undef CONFIG_CMD_NFS		/* NFS support			*/
@@ -131,8 +139,9 @@
 		"bootz ${loadaddr} - ${fdtaddr}\0" \
 	"nandboot=echo Booting from nand ...; " \
 		"run nandargs; " \
-		"nand read ${loadaddr} linux; " \
-		"bootm ${loadaddr}\0" \
+		"if nand read ${loadaddr} linux; then " \
+			"bootm ${loadaddr};" \
+		"fi;\0" \
 
 #define CONFIG_BOOTCOMMAND \
 	"mmc dev ${mmcdev}; if mmc rescan; then " \
@@ -151,7 +160,7 @@
 			"run mmcboot;" \
 		"fi;" \
 		"if run loadzimage; then " \
-			"if test $fdtfile; then " \
+			"if test -z \"${fdtfile}\"; then " \
 				"setenv fdtfile omap3-${boardname}-${expansionname}.dtb;" \
 			"fi;" \
 			"if run loadfdt; then " \