X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap3_logic.h;h=ecd56158597f60f3f8f3fe2eae4e2b692f129c76;hb=3b82402597622d04d0b0eb7b382068fe8456c7f5;hp=ee6db51274ca9f73e25b502c733afb3e93d266d0;hpb=806d2792472436a523084775190a11e9d8315275;p=oweals%2Fu-boot.git diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index ee6db51274..ecd5615859 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -5,7 +5,7 @@ * Configuration settings for the Logic OMAP35x/DM37x SOM LV/Torpedo * reference boards. * - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H @@ -14,22 +14,16 @@ /* * High Level Configuration Options */ -#define CONFIG_OMAP /* in a TI OMAP core */ -#define CONFIG_OMAP34XX /* which is a 34XX */ -#define CONFIG_OMAP3_LOGIC /* working with Logic OMAP boards */ -#define CONFIG_OMAP_GPIO -#define CONFIG_OMAP_COMMON +#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define CONFIG_SYS_TEXT_BASE 0x80400000 -#define CONFIG_SDRC /* The chip has SDRC controller */ - -#include /* get chip and board defs */ -#include - +#include +#define CONFIG_OMAP3_LOGIC /* working with Logic OMAP boards */ /* * Display CPU and Board information */ + #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -52,25 +46,14 @@ */ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ /* Sector */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) - /* * Hardware drivers */ -/* - * NS16550 Configuration - */ -#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK - /* * select serial console configuration */ +#undef CONFIG_CONS_INDEX #define CONFIG_CONS_INDEX 1 #define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 #define CONFIG_SERIAL1 1 /* UART1 on OMAP Logic boards */ @@ -86,12 +69,9 @@ #define CONFIG_DOS_PARTITION /* commands to include */ -#include - #define CONFIG_CMD_CACHE #define CONFIG_CMD_EXT2 /* EXT2 Support */ #define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ #define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define MTDIDS_DEFAULT "nand0=omap2-nand.0" @@ -103,56 +83,39 @@ #define CONFIG_CMD_MMC /* MMC support */ #define CONFIG_CMD_NAND /* NAND support */ #define CONFIG_CMD_NAND_LOCK_UNLOCK /* nand (un)lock commands */ -#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP -#define CONFIG_CMD_SETEXPR /* Evaluate expressions */ - -#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMI /* iminfo */ -#undef CONFIG_CMD_IMLS /* List all found images */ #define CONFIG_SYS_NO_FLASH /* * I2C */ -#define CONFIG_HARD_I2C -#define CONFIG_DRIVER_OMAP34XX_I2C - -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_I2C_MULTI_BUS +#define CONFIG_SYS_I2C +#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 +#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_OMAP34XX /* * TWL4030 */ -#define CONFIG_TWL4030_POWER + /* * Board NAND Info. */ -#define CONFIG_SYS_NAND_QUIET_TEST +#define CONFIG_SYS_NAND_BASE NAND_BASE #define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ /* to access nand */ -#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ - /* to access nand at */ - /* CS0 */ + #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ /* NAND devices */ -#define CONFIG_JFFS2_NAND -/* nand device jffs2 lives on */ -#define CONFIG_JFFS2_DEV "nand0" -/* start of jffs2 partition */ -#define CONFIG_JFFS2_PART_OFFSET 0x680000 -#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ - /* partition */ +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT + /* Environment information */ -#define CONFIG_BOOTDELAY 2 /* * PREBOOT assumes the 4.3" display is attached. User can interrupt @@ -242,22 +205,17 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT "OMAP Logic # " #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + + /* memtest works on */ #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ 0x01F00000) /* 31MB */ -#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ - /* address */ - /* * OMAP3 has 12 GP timers, they can be driven by the system clock * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). @@ -265,7 +223,6 @@ */ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 /* * Physical Memory Map @@ -279,16 +236,12 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M - #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ #if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#define CONFIG_SYS_FLASH_BASE NAND_BASE #elif defined(CONFIG_CMD_ONENAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_ONEN_BASE +#define CONFIG_SYS_FLASH_BASE ONENAND_MAP #endif /* Monitor at start of flash */ @@ -298,7 +251,6 @@ #if defined(CONFIG_CMD_NAND) #define CONFIG_NAND_OMAP_GPMC -#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET #endif @@ -306,12 +258,8 @@ #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ #define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) /* * SMSC922x Ethernet