X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap3_igep00x0.h;h=a5e7d8f6a41ae256f32c8aebd9605ae02816edf1;hb=1606b34aa50804227806971dbb6b82ea0bf81f55;hp=0bb79ab6b5cb1278b0cd547e2e6b31e1d20d4288;hpb=222a3113b46c4a16de3f51747201ca6565c8ee6a;p=oweals%2Fu-boot.git

diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index 0bb79ab6b5..a5e7d8f6a4 100644
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -29,12 +29,23 @@
 
 #define CONFIG_REVISION_TAG		1
 
-#define CONFIG_SUPPORT_RAW_INITRD
-
-/* define to enable boot progress via leds */
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
-    (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
-#define CONFIG_SHOW_BOOT_PROGRESS
+/* Status LED available for IGEP0020 and IGEP0030 but not IGEP0032 */
+#if (CONFIG_MACH_TYPE != MACH_TYPE_IGEP0032)
+#define CONFIG_STATUS_LED
+#define CONFIG_BOARD_SPECIFIC_LED
+#define CONFIG_GPIO_LED
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
+#define RED_LED_GPIO 27
+#elif (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
+#define RED_LED_GPIO 16
+#else
+#error "status LED not defined for this machine."
+#endif
+#define RED_LED_DEV				0
+#define STATUS_LED_BIT			RED_LED_GPIO
+#define STATUS_LED_STATE		STATUS_LED_ON
+#define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
+#define STATUS_LED_BOOT			RED_LED_DEV
 #endif
 
 /* GPIO banks */
@@ -196,6 +207,13 @@
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	3
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_HW
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
+/* NAND: SPL falcon mode configs */
+#ifdef CONFIG_SPL_OS_BOOT
+#define CONFIG_CMD_SPL_NAND_OFS		0x240000
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x280000
+#define CONFIG_CMD_SPL_WRITE_SIZE	0x2000
+#endif
 #endif
 
 #endif /* __IGEP00X0_H */