X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap3_evm_common.h;h=4910ddaa83b14c9e966aa78d8323440137f779b0;hb=48680493092b72f084b60757889fae3d7ee62058;hp=e6921c59e755bdf3c836460591a3f6b70dbede76;hpb=8e40852f0d60ab0b1381d43e38b31a6b3bcd6549;p=oweals%2Fu-boot.git

diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h
index e6921c59e7..4910ddaa83 100644
--- a/include/configs/omap3_evm_common.h
+++ b/include/configs/omap3_evm_common.h
@@ -22,12 +22,10 @@
  */
 #define CONFIG_OMAP			/* This is TI OMAP core */
 #define CONFIG_OMAP34XX			/* belonging to 34XX family */
-#define CONFIG_OMAP3430			/* which is in a 3430 */
 
 #define CONFIG_SDRC			/* The chip has SDRC controller */
 
 #define CONFIG_OMAP3_EVM		/* This is a OMAP3 EVM */
-#define CONFIG_OMAP3_MICRON_DDR		/* with MICRON DDR part */
 #define CONFIG_TWL4030_POWER		/* with TWL4030 PMIC */
 
 #undef CONFIG_USE_IRQ			/* no support for IRQs */
@@ -59,11 +57,6 @@
  */
 #define CONFIG_STACKSIZE	(128 << 10)	/* regular stack 128 KiB */
 
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4 << 10)	/* IRQ stack 4 KiB */
-#define CONFIG_STACKSIZE_FIQ	(4 << 10)	/* FIQ stack 4 KiB */
-#endif
-
 /*
  * Physical Memory Map
  * Note 1: CS1 may or may not be populated
@@ -71,12 +64,8 @@
  */
 #define CONFIG_NR_DRAM_BANKS		2
 #define PHYS_SDRAM_1			OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE		(32 << 20)
 #define PHYS_SDRAM_2			OMAP34XX_SDRC_CS1
 
-/* SDRAM Bank Allocation method */
-#define SDRC_R_B_C
-
 /* Limits for memtest */
 #define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
 #define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
@@ -259,7 +248,6 @@
 #if defined(CONFIG_CMD_NET)
 
 /* Ethernet (SMSC9115 from SMSC9118 family) */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X
 #define CONFIG_SMC911X_32_BIT
 #define CONFIG_SMC911X_BASE		0x2C000000
@@ -291,4 +279,32 @@
 
 #define CONFIG_SYS_CACHELINE_SIZE	64
 
+/* Defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_TEXT_BASE		0x40200800
+#define CONFIG_SPL_MAX_SIZE		(45 * 1024)	/* 45 KB */
+#define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
+
+#define CONFIG_SPL_BSS_START_ADDR	0x80000000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_POWER_SUPPORT
+#define CONFIG_SPL_OMAP3_ID_NAND
+#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
+
+/*
+ * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
+ * 64 bytes before this address should be set aside for u-boot.img's
+ * header. That is 0x800FFFC0--0x80100000 should not be used for any
+ * other needs.
+ */
+#define CONFIG_SYS_TEXT_BASE		0x80100000
+#define CONFIG_SYS_SPL_MALLOC_START	0x80208000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
+
 #endif /* __OMAP3_EVM_COMMON_H */