X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap3_beagle.h;h=bc8aa7adf5aaa534d45f01caf7626458afc9b184;hb=8947145cd0ae8adf1c5dc0ae6756d49bf5330b48;hp=85b83521e7e8de744aad37793987cf3e1ca834b6;hpb=b75643ad0a2429e7efc7317517b47203c3c2f7c9;p=oweals%2Fu-boot.git

diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 85b83521e7..bc8aa7adf5 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2006-2008
  * Texas Instruments.
@@ -5,32 +6,25 @@
  * Syed Mohammed Khasim <x0khasim@ti.com>
  *
  * Configuration settings for the TI OMAP3530 Beagle board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_NR_DRAM_BANKS            2 /* CS1 may or may not be populated */
-
 #include <configs/ti_omap3_common.h>
 
 /*
  * We are only ever GP parts and will utilize all of the "downloaded image"
  * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
  */
-#undef CONFIG_SPL_TEXT_BASE
-#define CONFIG_SPL_TEXT_BASE            0x40200000
 
-#define CONFIG_MISC_INIT_R
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_REVISION_TAG
 
 /* NAND */
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_MTD_RAW_NAND)
 #define CONFIG_SYS_FLASH_BASE		NAND_BASE
 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
@@ -43,18 +37,15 @@
                                          10, 11, 12, 13}
 #define CONFIG_SYS_NAND_ECCSIZE         512
 #define CONFIG_SYS_NAND_ECCBYTES        3
-#define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
+#define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_HW
 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 #define CONFIG_SYS_ENV_SECT_SIZE        SZ_128K
-#define CONFIG_ENV_OFFSET               0x260000
-#define CONFIG_ENV_ADDR                 0x260000
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_MTD_PARTITIONS           /* required for UBI partition support */
 /* NAND: SPL falcon mode configs */
 #if defined(CONFIG_SPL_OS_BOOT)
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x2a0000
 #endif /* CONFIG_SPL_OS_BOOT */
-#endif /* CONFIG_NAND */
+#endif /* CONFIG_MTD_RAW_NAND */
 
 /* USB EHCI */
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	147
@@ -63,15 +54,8 @@
 #define CONFIG_I2C_MULTI_BUS
 
 /* DSS Support */
-#define CONFIG_VIDEO_OMAP3
 
 /* TWL4030 LED Support */
-#define CONFIG_TWL4030_LED
-
-/* Environment */
-#define CONFIG_ENV_SIZE                 SZ_128K
-
-#define CONFIG_PREBOOT                  "usb start"
 
 #define MEM_LAYOUT_ENV_SETTINGS \
 	DEFAULT_LINUX_BOOT_ENV
@@ -83,7 +67,7 @@
 #define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \
 	#devtypel #instance " "
 
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_MTD_RAW_NAND)
 
 #define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
 	"bootcmd_" #devtypel #instance "=" \
@@ -101,13 +85,13 @@
 	func(UBIFS, ubifs, 0) \
 	func(NAND, nand, 0)
 
-#else /* !CONFIG_NAND */
+#else /* !CONFIG_MTD_RAW_NAND */
 
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
 	func(LEGACY_MMC, legacy_mmc, 0)
 
-#endif /* CONFIG_NAND */
+#endif /* CONFIG_MTD_RAW_NAND */
 
 #include <config_distro_bootcmd.h>