X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap2420h4.h;h=47437b09c645f0e8f25d99dc6fb219a362f91ae2;hb=a78ded13111dde555ed5de99cff10f41ae674cb1;hp=92df0b4fdc8c93ff81cec8af5ffd8ae064ccf6c2;hpb=ea393eb1d6a786fc2e895f90abb5f7e7541aef45;p=oweals%2Fu-boot.git

diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h
index 92df0b4fdc..47437b09c6 100644
--- a/include/configs/omap2420h4.h
+++ b/include/configs/omap2420h4.h
@@ -81,7 +81,8 @@
 /*
  * SMC91c96 Etherent
  */
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE     (H4_CS1_BASE+0x300)
 #define CONFIG_LAN91C96_EXT_PHY
 
@@ -135,7 +136,7 @@
     #define CONFIG_CMD_I2C
     #define CONFIG_CMD_JFFS2
 
-    #undef CONFIG_CMD_AUTOSCRIPT
+    #undef CONFIG_CMD_SOURCE
 #endif
 
 
@@ -147,42 +148,6 @@
 #define CONFIG_BOOTP_HOSTNAME
 #define CONFIG_BOOTP_BOOTPATH
 
-
-/*
- *  Board NAND Info.
- */
-#define CONFIG_NAND_LEGACY
-#define CONFIG_SYS_NAND_ADDR 0x04000000  /* physical address to access nand at CS0*/
-
-#define CONFIG_SYS_MAX_NAND_DEVICE 1	/* Max number of NAND devices */
-#define SECTORSIZE          512
-
-#define ADDR_COLUMN         1
-#define ADDR_PAGE           2
-#define ADDR_COLUMN_PAGE    3
-
-#define NAND_ChipID_UNKNOWN 0x00
-#define NAND_MAX_FLOORS     1
-
-#define WRITE_NAND_COMMAND(d, adr) do {*(volatile u16 *)0x6800A07C = d;} while(0)
-#define WRITE_NAND_ADDRESS(d, adr) do {*(volatile u16 *)0x6800A080 = d;} while(0)
-#define WRITE_NAND(d, adr) do {*(volatile u16 *)0x6800A084 = d;} while(0)
-#define READ_NAND(adr) (*(volatile u16 *)0x6800A084)
-#define NAND_WAIT_READY(nand)  udelay(10)
-
-#define NAND_NO_RB          1
-
-#define CONFIG_SYS_NAND_WP
-#define NAND_WP_OFF()  do {*(volatile u32 *)(0x6800A050) |= 0x00000010;} while(0)
-#define NAND_WP_ON()  do {*(volatile u32 *)(0x6800A050) &= ~0x00000010;} while(0)
-
-#define NAND_CTL_CLRALE(nandptr)
-#define NAND_CTL_SETALE(nandptr)
-#define NAND_CTL_CLRCLE(nandptr)
-#define NAND_CTL_SETCLE(nandptr)
-#define NAND_DISABLE_CE(nand)
-#define NAND_ENABLE_CE(nand)
-
 #define CONFIG_BOOTDELAY         3
 
 #ifdef NFS_BOOT_DEFAULTS
@@ -199,14 +164,12 @@
 /*
  * Miscellaneous configurable options
  */
+#define CONFIG_SYS_LONGHELP             /* undef to save memory */
 #ifdef CONFIG_APTIX
-#define V_PROMPT                 "OMAP2420 Aptix # "
+# define CONFIG_SYS_PROMPT		"OMAP2420 Aptix # "
 #else
-#define V_PROMPT                 "OMAP242x H4 # "
+# define CONFIG_SYS_PROMPT		"OMAP242x H4 # "
 #endif
-
-#define CONFIG_SYS_LONGHELP             /* undef to save memory */
-#define CONFIG_SYS_PROMPT               V_PROMPT
 #define CONFIG_SYS_CBSIZE               256  /* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
@@ -216,22 +179,20 @@
 #define CONFIG_SYS_MEMTEST_START        (OMAP2420_SDRC_CS0)  /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END          (OMAP2420_SDRC_CS0+SZ_31M)
 
-#undef	CONFIG_SYS_CLKS_IN_HZ           /* everything, incl board info, in Hz */
-
 #define CONFIG_SYS_LOAD_ADDR            (OMAP2420_SDRC_CS0) /* default load address */
 
 /* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by
  * 32KHz clk, or from external sig. This rate is divided by a local divisor.
  */
 #ifdef CONFIG_APTIX
-#define V_PVT                    3
+#define V_PTV			3
 #else
-#define V_PVT                    7  /* use with 12MHz/128 */
+#define V_PTV			7	/* use with 12MHz/128 */
 #endif
 
-#define CONFIG_SYS_TIMERBASE            OMAP2420_GPT2
-#define CONFIG_SYS_PVT                  V_PVT  /* 2^(pvt+1) */
-#define CONFIG_SYS_HZ	                 ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PVT))
+#define CONFIG_SYS_TIMERBASE		OMAP2420_GPT2
+#define CONFIG_SYS_PTV			V_PTV	/* 2^(PTV+1) */
+#define CONFIG_SYS_HZ			((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV))
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -296,7 +257,7 @@
  * JFFS2 partitions
  */
 /* No command line, one static partition, whole device */
-#undef CONFIG_JFFS2_CMDLINE
+#undef CONFIG_CMD_MTDPARTS
 #define CONFIG_JFFS2_DEV		"nor1"
 #define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
 #define CONFIG_JFFS2_PART_OFFSET	0x00000000
@@ -304,7 +265,7 @@
 /* mtdparts command line support */
 /* Note: fake mtd_id used, no linux mtd map file */
 /*
-#define CONFIG_JFFS2_CMDLINE
+#define CONFIG_CMD_MTDPARTS
 #define MTDIDS_DEFAULT		"nor1=omap2420-1"
 #define MTDPARTS_DEFAULT	"mtdparts=omap2420-1:-(jffs2)"
 */