X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fomap1610inn.h;h=7901b6c94e9242072b02eee2bd301276024b0ce5;hb=f5e5e1ff0ac3e2934f34174b6111c5f8eae1dd25;hp=68cf91c78af29530be8129c3a9e084e2ac4a4176;hpb=0e8d158664a913392cb01fb11a948d83f72e105e;p=oweals%2Fu-boot.git diff --git a/include/configs/omap1610inn.h b/include/configs/omap1610inn.h index 68cf91c78a..7901b6c94e 100644 --- a/include/configs/omap1610inn.h +++ b/include/configs/omap1610inn.h @@ -34,7 +34,8 @@ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP1610 1 /* which is in a 1610 */ #define CONFIG_INNOVATOROMAP1610 1 /* a Innovator Board */ -#define CONFIG_MACH_OMAP_INNOVATOR /* Select board mach-type */ + +#define CONFIG_MACH_TYPE MACH_TYPE_OMAP_INNOVATOR /* input clock of PLL */ /* the OMAP1610 Innovator has 12MHz input clock */ @@ -50,26 +51,25 @@ /* * Size of malloc() pool */ -#define CFG_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) /* * Hardware drivers */ /* */ -#define CONFIG_DRIVER_LAN91C96 +#define CONFIG_LAN91C96 #define CONFIG_LAN91C96_BASE 0x04000300 #define CONFIG_LAN91C96_EXT_PHY /* * NS16550 Configuration */ -#define CFG_NS16550 -#define CFG_NS16550_SERIAL -#define CFG_NS16550_REG_SIZE (-4) -#define CFG_NS16550_CLK (48000000) /* can be 12M/32Khz or 48Mhz */ -#define CFG_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart on helen */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK (48000000) /* can be 12M/32Khz or 48Mhz */ +#define CONFIG_SYS_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart on helen */ /* * select serial console configuration @@ -80,7 +80,7 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* @@ -119,27 +119,25 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "OMAP1610 Innovator # " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "OMAP1610 Innovator # " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ - -#define CFG_MEMTEST_START 0x10000000 /* memtest works on */ -#define CFG_MEMTEST_END 0x12000000 /* 32 MB in DRAM */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#define CONFIG_SYS_MEMTEST_START 0x10000000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x12000000 /* 32 MB in DRAM */ -#define CFG_LOAD_ADDR 0x10000000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x10000000 /* default load address */ /* The 1610 has 6 timers, they can be driven by the RefClk (12Mhz) or by * DPLL1. This time is further subdivided by a local divisor. */ -#define CFG_TIMERBASE 0xFFFEC500 /* use timer 1 */ -#define CFG_PVT 7 /* 2^(pvt+1), divide by 256 */ -#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT)) +#define CONFIG_SYS_TIMERBASE 0xFFFEC500 /* use timer 1 */ +#define CONFIG_SYS_PTV 7 /* 2^(PTV+1), divide by 256 */ +#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) /*----------------------------------------------------------------------- * Stack sizes @@ -167,33 +165,38 @@ #ifndef __ASSEMBLY__ extern unsigned long omap_flash_base; /* set in flash__init */ #endif -#define CFG_FLASH_BASE omap_flash_base +#define CONFIG_SYS_FLASH_BASE omap_flash_base #elif defined(CONFIG_CS0_BOOT) -#define CFG_FLASH_BASE PHYS_FLASH_1_BM0 +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1_BM0 #else -#define CFG_FLASH_BASE PHYS_FLASH_1_BM1 +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1_BM1 #endif +#define PHYS_SRAM 0x20000000 + /*----------------------------------------------------------------------- * FLASH and environment organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ #define PHYS_FLASH_SIZE 0x02000000 /* 32MB */ -#define CFG_MAX_FLASH_SECT (259) /* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_SECT (259) /* max number of sectors on one chip */ /* addr of environment */ -#define CONFIG_ENV_ADDR (CFG_FLASH_BASE + 0x020000) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x020000) /* timeout values are in ticks */ -#define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */ -#define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ +#define CONFIG_SYS_FLASH_WRITE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Write */ #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ #define CONFIG_ENV_OFFSET 0x20000 /* environment starts here */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_SP_ADDR PHYS_SRAM + #endif /* __CONFIG_H */