X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx7dsabresd.h;h=9807ace1d90e349fda659a216f89a45399946f19;hb=b1a873df0a3fb4e4cac8da5e68263715cf71dd4a;hp=988d363c41bd9b9df163ad2e5dbdb4eb49381703;hpb=227c59a856fd2d3cd2f571baf5fdf53103b55a3a;p=oweals%2Fu-boot.git

diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h
index 988d363c41..9807ace1d9 100644
--- a/include/configs/mx7dsabresd.h
+++ b/include/configs/mx7dsabresd.h
@@ -16,15 +16,10 @@
 
 #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-
-/* Uncomment to enable secure boot support */
-/* #define CONFIG_SECURE_BOOT */
-#define CONFIG_CSF_SIZE			0x4000
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(32 * SZ_1M)
 
 /* Network */
-#define CONFIG_CMD_MII
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define CONFIG_FEC_XCV_TYPE             RGMII
@@ -49,11 +44,7 @@
 #undef CONFIG_BOOTM_PLAN9
 #undef CONFIG_BOOTM_RTEMS
 
-#undef CONFIG_CMD_EXPORTENV
-#undef CONFIG_CMD_IMPORTENV
-
 /* I2C configs */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
@@ -65,7 +56,6 @@
 #ifdef CONFIG_IMX_BOOTAUX
 /* Set to QSPI1 A flash at default */
 #define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000
-#define CONFIG_CMD_SETEXPR
 
 #define UPDATE_M4_ENV \
 	"m4image=m4_qspi.bin\0" \
@@ -182,15 +172,12 @@
 		   "fi; " \
 	   "else run netboot; fi"
 
-#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x20000000)
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 #define CONFIG_SYS_HZ			1000
 
-#define CONFIG_STACKSIZE		SZ_128K
-
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
@@ -204,11 +191,13 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
+/* environment organization */
 #define CONFIG_ENV_SIZE			SZ_8K
 #define CONFIG_ENV_IS_IN_MMC
 
+/* MXC SPI driver support */
+#define CONFIG_MXC_SPI
+
 /*
  * If want to use nand, define CONFIG_NAND_MXS and rework board
  * to support nand, since emmc has pin conflicts with nand
@@ -241,10 +230,6 @@
 #define CONFIG_MMCROOT			"/dev/mmcblk0p2"  /* USDHC1 */
 
 /* USB Configs */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX7
-#define CONFIG_USB_STORAGE
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_ASIX
@@ -254,34 +239,13 @@
 
 #define CONFIG_IMX_THERMAL
 
-#define CONFIG_CI_UDC
 #define CONFIG_USBD_HS
-#define CONFIG_USB_GADGET_DUALSPEED
 
-#define CONFIG_USB_GADGET
-#define CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
-#define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
-
-#define CONFIG_G_DNL_VENDOR_NUM		0x0525
-#define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
-#define CONFIG_G_DNL_MANUFACTURER	"FSL"
-
-/* USB Device Firmware Update support */
-#define CONFIG_CMD_DFU
-#define CONFIG_USB_FUNCTION_DFU
-#define CONFIG_DFU_MMC
-#define CONFIG_DFU_RAM
 
-#define CONFIG_VIDEO
 #ifdef CONFIG_VIDEO
-#define CONFIG_CFB_CONSOLE
 #define CONFIG_VIDEO_MXS
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
 #define CONFIG_CMD_BMP
@@ -291,7 +255,6 @@
 #endif
 
 #ifdef CONFIG_FSL_QSPI
-#define CONFIG_CMD_SF
 #define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_MACRONIX
 #define CONFIG_SPI_FLASH_BAR