X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx6sabreauto.h;h=e444930dc87baa2a3d05aabcfd8aa6334a2b1b55;hb=4ff63383e3497389e66cf70943a83bdb1810462a;hp=4b8f9c817e576c2bb8edb1bbfe8af4accf9c5571;hpb=ae3584498bf81aa3be9ae6f90fbb04e07d707276;p=oweals%2Fu-boot.git

diff --git a/include/configs/mx6sabreauto.h b/include/configs/mx6sabreauto.h
index 4b8f9c817e..e444930dc8 100644
--- a/include/configs/mx6sabreauto.h
+++ b/include/configs/mx6sabreauto.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2012 Freescale Semiconductor, Inc.
  *
  * Configuration settings for the Freescale i.MX6Q SabreAuto board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __MX6SABREAUTO_CONFIG_H
@@ -18,7 +17,6 @@
 #define CONSOLE_DEV		"ttymxc3"
 
 /* USB Configs */
-#define CONFIG_USB_ETHER_ASIX
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
 #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
@@ -46,9 +44,6 @@
 #define CONFIG_SYS_FLASH_SECT_SIZE      (128 * 1024)
 #define CONFIG_SYS_MAX_FLASH_BANKS 1    /* max number of memory banks */
 #define CONFIG_SYS_MAX_FLASH_SECT 256   /* max number of sectors on one chip */
-#define CONFIG_SYS_FLASH_CFI            /* Flash memory is CFI compliant */
-#define CONFIG_FLASH_CFI_DRIVER         /* Use drivers/cfi_flash.c */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* Use buffered writes*/
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 #define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
 #endif
@@ -67,16 +62,12 @@
 #define CONFIG_SYS_I2C_SPEED		100000
 
 /* NAND stuff */
-#define CONFIG_NAND_MXS
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           0x40000000
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 
 /* DMA stuff, needed for GPMI/MXS NAND support */
-#define CONFIG_APBH_DMA
-#define CONFIG_APBH_DMA_BURST
-#define CONFIG_APBH_DMA_BURST8
 
 /* PMIC */
 #define CONFIG_POWER