X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx6qsabreauto.h;h=1c998058a94f1baa593490e7d067f3a432f1df62;hb=a50adb7b4d86b924789dbe437ae92006d2f654f8;hp=3f1c88e239f47c3d5679fc255719a742f36ba76d;hpb=256d83cd6d8caf345ffba414a0f77f30d68caf8a;p=oweals%2Fu-boot.git

diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h
index 3f1c88e239..1c998058a9 100644
--- a/include/configs/mx6qsabreauto.h
+++ b/include/configs/mx6qsabreauto.h
@@ -12,11 +12,6 @@
 #define CONFIG_MACH_TYPE	3529
 #define CONFIG_MXC_UART_BASE	UART4_BASE
 #define CONFIG_CONSOLE_DEV		"ttymxc3"
-#if defined CONFIG_MX6Q
-#define CONFIG_DEFAULT_FDT_FILE	"imx6q-sabreauto.dtb"
-#elif defined CONFIG_MX6DL
-#define CONFIG_DEFAULT_FDT_FILE	"imx6dl-sabreauto.dtb"
-#endif
 #define CONFIG_MMCROOT			"/dev/mmcblk0p2"
 #define PHYS_SDRAM_SIZE		(2u * 1024 * 1024 * 1024)
 
@@ -37,6 +32,16 @@
 
 #include "mx6sabre_common.h"
 
+#undef CONFIG_SYS_NO_FLASH
+#define CONFIG_SYS_FLASH_BASE           WEIM_ARB_BASE_ADDR
+#define CONFIG_SYS_FLASH_SECT_SIZE      (128 * 1024)
+#define CONFIG_SYS_MAX_FLASH_BANKS 1    /* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 256   /* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_CFI            /* Flash memory is CFI compliant */
+#define CONFIG_FLASH_CFI_DRIVER         /* Use drivers/cfi_flash.c */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* Use buffered writes*/
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+
 #define CONFIG_SYS_FSL_USDHC_NUM	2
 #if defined(CONFIG_ENV_IS_IN_MMC)
 #define CONFIG_SYS_MMC_ENV_DEV		0
@@ -46,6 +51,9 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED		100000
 
 /* NAND flash command */
@@ -64,4 +72,10 @@
 #define CONFIG_APBH_DMA_BURST
 #define CONFIG_APBH_DMA_BURST8
 
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE100
+#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
+
 #endif                         /* __MX6QSABREAUTO_CONFIG_H */